IBM BladeCenter S SAS RAID Controller Module, Installation And User Manual

Page: 36 / 216

5. At the
<CLI>
prompt, enter
alert –get
and press Enter. Verify the
configuration changed from a single to dual controller by querying the active
alert list for alert 706. Alert 706 is automatically cleared from the active alert
list after two minutes.
<CLI> alert -get
Existing Alerts :
__________________________________________________________________________________________
|AlertCode| Id | Time | SlotID | Severity | WWN | Ackable |MaskState|
|==========================================================================================|
|
706 | 61| 20100219232029 | 0 | Info | 5005076b07441aff | 1 | Masked|
|------------------------------------------------------------------------------------------|
| Msg: Controller changed from Single to Dual Controller Mode (SCFG set to 2)
|
|==========================================================================================|
6. At the
<CLI>
prompt, enter
list controller
and press Enter. Verify the
controllers are operating in a dual primary-secondary configuration .
<CLI> list controller
_______________________________________________________________________
|
Ctlr# | Controller | Status | Ports | LUNs |
|_____________|________________|____________________|_________|_________|
|
0 | Ctlr0| PRIMARY| 1| 10|
| 1 | Ctlr1| SECONDARY| 1| 10|
|_____________|________________|____________________|_________|_________|
7. At the
<CLI>
prompt, enter
alert -get
and press Enter to query the active
alert list for alert 5600. Record the host port WWN to create host-LUN
mappings.
<CLI> alert -get
Current Machine Local Time: 02/19/2010
11:20:36 PM
Existing Alerts :
__________________________________________________________________________________________
|AlertCode| Id | Time | SlotID | Severity | WWN | Ackable |MaskState|
|==========================================================================================|
|
5600 | 9 | 20100219162030 | 1 | Info | 5005076b07441aff | 1 | Masked |
|------------------------------------------------------------------------------------------|
| Msg: Illegal host 0x500062b00007e569 access attempted
|
|==========================================================================================|
8. At the
<CLI>
prompt, enter
host –add <WWN>
and press Enter to add the host
WWN to the list of host.
<CLI> host -add 500062b00007e569
Host added with WWN 500062b00007e569 and Name CliHost1
9.
At the
<CLI>
prompt, enter
host –get
and press Enter to verify the new host
was added to the list of host servers.
<CLI> host -get
HostWWN 500062b00007e568, HostName Blade_Bay_1 :
LUNs Mapped :
___________________________________________________________
| LUN | Permission | Volume |
|_________|_____________________|___________________________|
|
0| ACCESS_READWRITE| Raid10_Pool:r10_vol_1|
| 4| ACCESS_READWRITE| Raid10_Pool:r10_vol_10|
| 3| ACCESS_READWRITE| Raid10_Pool:r10_vol_4|
| 2| ACCESS_READWRITE| Raid10_Pool:r10_vol_3|
| 1| ACCESS_READWRITE| Raid10_Pool:r10_vol_2|
| 5| ACCESS_READWRITE| Raid10_Pool:r10_vol_9|
| 6| ACCESS_READWRITE| Raid10_Pool:r10_vol_8|
| 7| ACCESS_READWRITE| Raid10_Pool:r10_vol_7|
| 8| ACCESS_READWRITE| Raid10_Pool:r10_vol_6|
26
IBM SAS RAID Controller Module: Installation and User's Guide IBM BladeCenter S SAS RAID Controller Module