IBM BladeCenter S SAS RAID Controller Module, Installation And User Manual

Page: 117 / 216

v
4xxx – Warning – Action Required Alert Codes
v
5xxx – Warning – Possible Action Required Alert Codes
v
9xxx – Critical Status Notification Alert Codes
Note: The thousands digit indicates the severity and user action.
The hundreds digit indicates the RAID Subsystem component associated with the
alert:
v
0xx Enclosure
v 1xx Controller HW-FW
v
2xx Battery
v
3xx Drive HW-FW-Tray
v
4xx Drive Group
v
5xx Volume-FlashCopy-VolCopy
v
6xx Connectivity Host-Ethernet-Disk
v
7xx Config-Settings-Metadata
Alert Attributes
Each alert has the following attributes:
Table 11. Alert Attribute descriptions
Attribute Description
Instance ID 32-bit per controller alert sequence number
Severity Informational, Warning, or Critical
Timestamps Time Created, Time Cleared / Acked
Controller ID Unique controller ID
State The current state of the alert. They can be as follows:
v
Masked – Alert is maskable and has been masked
v
Unmasked – Alert is maskable but is not masked
v
Unmaskable – Alert is persistent
v
Unacked – Alert can be cleared by user ack
Message Descriptive string
Chapter 11. Troubleshooting and support
107