v
Gateway
d.
Make a note of the
Current IP Configuration
for RAID Controller
Subsystem. The values to note are:
v
Configuration Method
v
IP Address
v
Subnet Mask
v
Gateway Address
v
VLAN ID
e.
Click
Bay 4
under
I/O Module Configuration
.
f.
Make a note of the
Current IP Configuration
for SAS Switch Subsystem.
The values to note are:
v
IP Address
v
Subnet Mask
v
Gateway
g.
Make a note of the
Current IP Configuration
for RAID Controller
Subsystem. The values to note are:
v
Configuration Method
v
IP Address
v
Subnet Mask
v
Gateway Address
v
VLAN ID
6.
Remove each Battery Backup Unit from the Media Tray.
a.
Open the release handle (rotate the handle down).
b.
Slide the Battery Backup Unit out of the media tray.
7.
Remove the Media Tray from the chassis.
a.
Open the release handles (rotate the top handle up and the bottom handle
down) to disengage the media tray from the IBM BladeCenter S chassis.
b.
Slide the media tray out of the IBM BladeCenter S chassis.
Note:
When you remove the media tray, the fan modules begin to run at
full speed.
c.
If you are instructed to return the media tray or DVD drive, follow all
packaging instructions, and use any packaging materials for shipping that
are supplied to you.
8.
Insert the new Media Tray into the chassis.
a.
Slide the media tray into the IBM BladeCenter S chassis until it stops.
b.
Close the release handles (rotate the top handle down and the bottom
handle up).
9.
Insert each Battery Backup Unit into the new Media Tray.
a.
Slide the Battery Backup Unit into the media tray.
b.
Close the release handle (rotate the handle up).
10.
Reset the factory default settings for the SAS Switch in bay 3.
a.
Click
I/O Module Tasks
>
Configuration
.
b.
Click
Bay 3
under
I/O Module Configuration
.
c.
Click
Advanced Configuration
under
Bay 3 (SAS RAID Ctlr Mod)
.
d.
Click
Restore Factory Defaults
under
Advanced Configuration
for I/O
Module 3.
Chapter 11. Troubleshooting and support
163
Summary of Contents for BladeCenter S SAS RAID Controller Module
