IBM BladeCenter S SAS RAID Controller Module, Installation And User Manual

Page: 21 / 216

Logical identifiers and physical location codes
You can use logical identifiers and physical location codes to locate resources in your
system.
Use logical identifiers to identify a specific resource for commands, status, and
messages. Use physical location codes to identify a specific resource in the physical
world; this helps identify the exact location of a resource when you remove or
replace them.
You can see logical identifiers and physical location codes in IBM Storage
Configuration Manager by performing the following steps:
1.
From the IBM Storage Configuration Manager navigation panel, select Health >
Physical View . The Physical View page displays a graphical representation of
the devices on your server.
2. Hover the mouse cursor over the resources that appear in the Physical View
page to display the logical identifiers and physical location codes.
Option package contents
This topic describes the contents of the option package.
The connectivity module option package contains the following items:
v
One IBM BladeCenter S SAS RAID Controller Module
v
One Battery Backup Unit (45W5002) is bundled with each IBM BladeCenter S
SAS RAID Controller Module.
v
The RAID Controller Getting Started Guide
v
The Support CD, which includes:
– The RAID Controller and SAS Expansion Card
Installation and User’s Guide
– The RAID Controller and SAS Expansion Card Getting Started Guide
– IBM BladeCenter Storage Configuration Manager Planning, Installation, and
Configuration Guide
– SAS Expansion Card applications
– MIB files
Figure 2. Back view of an IBM BladeCenter S chassis
Chapter 1. Introduction
11