manualshive.com logo in svg

IBM B-Series, Maintenance Information

The Schlage B-Series is a high-quality lock system designed for residential and commercial use. Ensure a smooth installation with our comprehensive Installation Instructions manual, available for free download from our website. Equip yourself with the necessary knowledge to effortlessly set up your Schlage B-Series lock for added security and convenience.

Share
Download
background image

 

 

 

Model B02, B12 and B22 Connections

Refer to Figure 235 on page INST-53 for typical SCSI cabling diagrams while performing the following
steps.

1. If this machine is a Model B02, remove the back cover plate from the library. The cover is

attached using plastic snap-in retainers. Rotate the plastic retainers one-quarter turn in either
direction to release the cover.

2. For a 3570 Split Configuration setup, continue at step 8. For a 3570 Base Configuration setup,

continue with the following step. (See “Library Configurations” on page LIBRARY-7 for information
about base and split configurations.)

Base Configuration:

3. Ensure the SCSI Bus Jumper (P/N 49G6456) is connected to the rightmost SCSI connector on the

back of tape drive 1, and to the leftmost SCSI connector on the back of tape drive 2. (See items

2

 and 

3

 in Figure 236 on page INST-55).

4. If the 3570 is the first, or only, device in line connected to the initiator, connect the SCSI cable

coming from the initiator to the leftmost SCSI connector on the back of the library. (See item 

1

 in

Figure 236 on page INST-55).

5. If the 3570 is not the first device on the SCSI bus, connect the SCSI interface cable coming from

the next closest device to the leftmost SCSI connector on the back of the library. (See item 

1

 in

Figure 236 on page INST-55).

6. If this is the last device on the SCSI bus, locate the SCSI interface terminator (P/N 61G8324) and

attach it to the rightmost SCSI interface connector on the back of the library. (See item 

4

 in

Figure 236 on page INST-55). If the library is not the last device on the SCSI bus, locate the
SCSI interface cable to the next device, and connect it to the unused, rightmost SCSI interface
connector on the back of the library. (See item

4

 in Figure 236 on page INST-55).

7. Continue at step 17 on page INST-55.

Split Configuration:

8. Remove the SCSI Bus Jumper (P/N 49G6456) or (P/N 05H9527) that connects the SCSI

connector on the back of tape drive 1 to the SCSI connector on the back of tape drive 2, if it is
installed. (See items 

2

 and

3

 in Figure 236 on page INST-55).

Note:  If attaching to an AS/400 System, the SCSI Bus Jumper must be removed. If attaching to

other types of hosts, the SCSI Bus Jumper may be left in place to connect both devices on
a single SCSI Bus.

9. If tape drive 1 in the 3570 is the first, or only, device in line connected to the initiator, connect the

SCSI cable coming from the initiator to the leftmost SCSI connector on the back of tape drive 1.
(See item

1

 in Figure 236 on page INST-55).

10. If tape drive 1 is not the first device on the SCSI bus, connect the SCSI interface cable coming

from the next closest device to the leftmost SCSI connector on the back of tape drive 1. (See item

1

 in Figure 236 on page INST-55).

11. If tape drive 1 is the last device on the SCSI bus, locate the SCSI interface terminator (P/N

61G8324) and attach it to the rightmost SCSI interface connector on the back of tape drive 1. (See
item 

2

 in Figure 236 on page INST-55).

12. If tape drive 1 is not the last device on the SCSI bus, locate the SCSI interface cable to the next

device, and connect it to the unused, rightmost SCSI interface connector on the back of tape drive
1. (See item

2

 in Figure 236 on page INST-55).

INST-54

IBM 3570 MI 

 

Summary of Contents for B-Series









































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for B-Series

U-Line S-5188 Quick Start Manual preview
S-5188
Brand: U-Line Pages: 3
Husky H6CH36LEG Use And Care Manual preview
H6CH36LEG
Brand: Husky Pages: 4
Icy Box IB-RD3262-USE2 User Manual preview
IB-RD3262-USE2
Brand: Icy Box Pages: 36
ABSCO SHEDS CYCHK Assembly & Instruction Manual preview
CYCHK
Brand: ABSCO SHEDS Pages: 25
Lifetime 1034594 Assembly Instructions Manual preview
1034594
Brand: Lifetime Pages: 20
Synology DiskStation Series Upgrade Installation Instructions preview
DiskStation Series
Brand: Synology Pages: 6
U-Line H-6993-LAM Assembly preview
H-6993-LAM
Brand: U-Line Pages: 9
LaCie Big Disk USB 2.0 User Manual preview
Big Disk USB 2.0
Brand: LaCie Pages: 47
U-Line S-12707 Quick Start Manual preview
S-12707
Brand: U-Line Pages: 3
Fujitsu Citrix XenServer Configuration Manual preview
Citrix XenServer
Brand: Fujitsu Pages: 23
Fujitsu C141-E280 Product/Maintenance Manual preview
C141-E280
Brand: Fujitsu Pages: 12
Fujitsu DynaMO 640SZI Installation Manual preview
DynaMO 640SZI
Brand: Fujitsu Pages: 14
Fujitsu DynaMO 1300 User Manual preview
DynaMO 1300
Brand: Fujitsu Pages: 50
Fujitsu eternus af Configuration Manual preview
eternus af
Brand: Fujitsu Pages: 43
Fujitsu C141-E282 Installation Manual preview
C141-E282
Brand: Fujitsu Pages: 12
Fujitsu DynaMO 1300U2 Pocket User Manual preview
DynaMO 1300U2 Pocket
Brand: Fujitsu Pages: 70
Fujitsu C141-E090-02EN Product Manual preview
C141-E090-02EN
Brand: Fujitsu Pages: 189
Fujitsu DynaMO 1300FE User Manual preview
DynaMO 1300FE
Brand: Fujitsu Pages: 202

Brands by name

Popular brands

Load more brands