IBM B-Series, Maintenance Information

Page: 39 / 648

START
Figure 10 (Page 3 of 5). ATTENTION LIBRARY Messages
Message
Meaning
FRUs FRU Name or Description Prob-
ability
TAC
Code &
(Duration
in hours)
Page Reference or Instruction
No
cartridge
The device detects the presence of cartridges, but cannot find a cartridge in the import position in the magazine
or the priority cell.
1. Check the position of all the cartridges to ensure they are properly positioned in the import position of the
magazine and the priority cell. If this condition is not cleared, remove and replace the magazine.
2. Press Start.
3. Before replacing FRUs below, ensure that the magazine and priority cell sensors are operating correctly. See
Figure 130 on page PANEL-27 and select UTILITIES from the CE OPTIONS Menu, then select DISP
SENSORS from the CE UTILITIES Menu.
9A Picker assembly 50% T12 (0.1) CARR-40
9E Priority cell cartridge-present
sensor 30% T31 (0.1) CARR-48
97 Library control card 10% T15 (0.1) CARR-38
A5 Library sensor cable 7% T04 (0.4) CARR-50
Extra
cartridge
The device loaded a cartridge from the magazine and detected that another cartridge was placed in its home
position. The device attempts to place the now-displaced cartridge in the priority cell to await operator action. If
the priority cell is full, it ejects the cartridge when the priority slot is unloaded or when the Enter push button is
pressed.
1. Ensure that no cartridge has been inserted into an ‘in use’ cell.
2. Before replacing FRUs below, ensure that the appropriate sensors are operating correctly. See Figure 130 on
page PANEL-27 and select UTILITIES from the CE OPTIONS Menu, then select DISP SENSORS from the
CE UTILITIES Menu.
9E Priority cell cartridge-present
sensor 40% T31 (0.1) CARR-48
9A Picker assembly 30% T12 (0.1) CARR-40
97 Library control card 20% T15 (0.1) CARR-38
A5 Library sensor cable 5% T04 (0.4) CARR-50
No
Cleaner
cartridge
A request was made to clean the head, but the device cannot find a cleaner cartridge in the cleaner cell.
1. Check the cleaner cell to ensure that a cleaner cartridge is present in the cell.
2. Ensure that it is a cleaner cartridge and not just a data cartridge. The holes in the casing are different and
the media in the cleaner cartridge does not fill the entire cartridge Cleaner cartridges have a gray file protect
lever.
3. Before replacing FRUs below, ensure that the cleaner cartridge present sensor is operating correctly. See
Figure 130 on page PANEL-27 and select UTILITIES from the CE OPTIONS Menu, then select DISP
SENSORS from the CE UTILITIES Menu.
A3 Cleaner cartridge- present sensor 64% T31 (0.1) CARR-49
9A Picker assembly 21% T12 (0.1) CARR-40
A5 Library sensor cable 10% T04 (0.4) CARR-50
97 Library control card 5% T15 (0.1) CARR-38
Start
START-27