IBM B-Series Maintenance Information Download Page 271 | Manualshive

Page: 271 / 648

background image

7. RS-422 jumper cable, P/N 65F5399 (Model B02, B12 and B22 only). This cable, which connects

the two drives in a dual drive model library, may be installed in the Model B02 at the factory, but is
usually shipped uninstalled in the Model B12 and B22 due to space limits within the packing
materials. If not already installed, it will be installed later in these procedures.

8. Pedestal parts (included with Models B01 or B02 only).

|

9. Rack mounting hardware (Models B11 and B12 only), slides only no tray. See Figure 203 on

|

page INST-14 for a detailed list.

|

10. Rack mounting hardware (Models B11 and B12 only), slides and tray. See Figure 211 on

|

page INST-22 for a detailed list.

|

11. Rack mounting hardware (Models B21 and B22 only). See Figure 220 on page INST-32 for a

|

detailed list.

12. Library Door Keys (not included with Model B00). The five-digit number from the key tag may be

printed on a label that is located under the right cartridge magazine. Look through the priority cell
and underneath the right corner of the right cartridge magazine for the key code label. If the label
is not present, record the five-digit number from the key tag here__________. If the keys are lost
or need to be replaced, additional keys can ordered from:

Attention - IBM Account Manager
Fort Lock Corp.
3000 North River Road
River Grove, IL 60171

708-456-1100

708-456-9476 FAX

Specify Vendor P/N - G010103AX-3228 (C1038AD ’Short‘ with IBM Logo) along with the five-digit
code that came with the original keys.

The following items are also provided:

1. If the Bar Code Reader feature 2011 is specified, the feature comes pre-installed in the Magstar

MP Tape Subsystem.

2. One device driver diskette, as appropriate for the host system.

Note: A device driver diskette is not needed for AS/400 systems. The device driver is part of the

operating system.

|

3. If this is a Model B21 or B22 attached to an IBM Netfinity 5500/7000 or IBM PC Server 325/330

|

system, a 2944/UW Fast and Wide SCSI adapter, P/N 08L6517, will be included and packaged

|

with installation instructions. The adapter and instructions should be given to the customer so that

|

they may install it on the PC System. Install information pamphlet is included with adapter.

4. The

Magstar MP 3570 Tape Subsystem Operator Guide, B-Series Models, GA32-0345.

5. The

IBM Magstar MP 3570 Tape Subsystem Maintenance Information, B-Series Models P/N

05H9395.

6. The

IBM SCSI Tape Drive, Medium Changer, and Library Device Installation and User's Guide,

GC35–0154.

INST

Figure 194 (Page 1 of 2). Available Power Cords for Magstar MP 3570 Tape Subsystem

Magstar MP P/N and Feature

Code

Description

46F5893 (FC 9080 and 9986)

Watertight Plug/Power Cord, Chicago

46F5894 (FC 9080 and 9800)

Watertight Plug/Power Cord, U.S.A.

Installation

INST-3

«
...
269
270
271
272
273
...
»

Summary of Contents for B-Series









































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for B-Series

Brand: Cactus Pages: 27

Brand: Backyard Pages: 63

Brand: QNAP Pages: 7

Brand: WiebeTech Pages: 5

URBAN 100.1P DEC

Brand: garofalo Pages: 16

LITTLE DISK USB 2.0

Brand: LaCie Pages: 23

Brand: Icy Box Pages: 24

Brand: U-Line Pages: 9

Brand: Raidon Pages: 2

220-420LTO - QUICK

Brand: TANDBERG Pages: 8

Brand: Argus Pages: 1

Memorator Pro 5xHS

Brand: Kvaser Pages: 27

HTS723212L9A360

Brand: Hitachi Pages: 176

HTS723212L9A360

Brand: Hitachi Pages: 5

MediaLounge DSM-602H

Brand: D-Link Pages: 12

SharePort DNS-323

Brand: D-Link Pages: 17

Brand: D-Link Pages: 46

MediaLounge DSM-622H

Brand: D-Link Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands