IBM 270, Service Manual

Page: 596 / 622

System safety inspection
Service log
HSL loop configuration and status form
HSL link status diagnosis form
Installed features in a PCI bridge set form
HSL cable location form
Problem summary form
For use by authorized service providers.
Use this form to record information displayed on the control panel when a problem occurs on the system.
Note: Determine if the system has logical partitions. Go to Determine if the system has logical partitions
before continuing with this procedure.
If the system has logical partitions, then use this form to record information displayed on either the control
panel or the Work with Partition Status display. To access the panel functions of a logically partitioned
system, see Accessing the panel functions of a logical partition in the iSeries Service Functions
.
Note: You may copy this form as necessary.
1. Describe the problem.
2. Record the date and time.
3. Record any control panel lights that are on.
v Power active
v
Processor active
v Attention
4. Does the system have logical partitions?
v No : Continue with the next step.
v
Yes : Record the following information.
.-------------------------------------------------------------.
| Partition information |
+------------------------------.------------------------------+
| Partition’s ID | |
+------------------------------+------------------------------+
| Partition’s Name | |
| (Not Req’d) | |
+------------------------------+------------------------------+
| Partition’s State | |
| Examples: Failed, Hold, etc. | |
+------------------------------+------------------------------+
| Partition’s OS/400 Version | |
| and Release | |
| Example: V4R4 | |
+------------------------------+------------------------------+
| Record the Date and Time | |
| system values set in the | |
| partition if possible. | |
’------------------------------’------------------------------’
584
Hardware (Remove and Replace; Part Locations and Listings)