![background image](http://html1.mh-extra.com/html/hyundai/hx130-lcr/hx130-lcr_manual_2196326522.webp)
8-94
Tighten two M16 eyebolt to the ring gear
(27) and then lift the ring gear (27) out of
casing (1).
27
1
21
9
12
10
22
Disassembling carrier 2 assembly (8).
Using M8 solid drill, crush spring pin (22)
so that the pin 2 (12) can be removed.
Do not reuse spring pin (22).
Remove pin 2 (12), planet gear 2 (10) and
thrust washer (21) from the carrier 2 (9).
Put matching marks on the planet gear 2
(10) and the pin 2 (22) for easy reassembly.
Do not disassemble pin 2 (12), carrier 2
(9) and spring pin (22) but in case of
replacement.
(8)
(9)
Remove stop ring (25) from the drive
shaft (2).
25
2
(10)
①
※
②
※
※
Remove drive shaft (2) with roller bearing
(6) and oil seal (7) assembled.
Remove knock pin (28) from the casing
(1).
1
7
6
2
28
(11)
130ZF8sm12
130ZF8sm13
130ZF8sm14
130ZF8sm15
Summary of Contents for HX130 LCR
Page 11: ...1 1 SECTION 1 GENERAL Group 1 Safety Hints 1 1 Group 2 Specifications 1 10 ...
Page 174: ...4 5 MEMORANDUM HYUNDAI HEAVY INDUSTRIES CO LTD CONSTRUCTION EQUIPMENT DIV ...
Page 536: ...8 108 125LCR8TM30 Turn casing 1 upside down and remove oil seal 3 using jig 29 ...
Page 566: ...8 138 Remove lock nut 22 and then boot 23 14 36078RL14 2507ARL10 ...