![background image](http://html1.mh-extra.com/html/hyundai/hx130-lcr/hx130-lcr_manual_2196326295.webp)
5-67
Manual DPF regeneration
Manual DPF regeneration
※
235F3CD55
130ZF3CD10-3
(1) Manual DPF regeneration can be performed when the below
conditions are met.
Engine running > 10 seconds
Coolant temperature > 65 ˚C
Engine at low idle
Soot load >130% (when DPF lamp is ON)
Safety lever = Lock position
Manual DPF Regeneration must be performed when the machine
Manual DPF Regeneration must be performed when the machine
is in a fireproof area.
is in a fireproof area.
(2) Procedure
Procedure
Park a machine in a fireproof area.
Set the engine at a low idle.
Push the DPF switch to manual regeneration position (I) at least 2
seconds to initiate the manual DPF regeneration.
Refer to the operator's manual page 3-39 for the DPF switch
Refer to the operator's manual page 3-39 for the DPF switch
operation.
operation.
The engine speed will accelerate automatically from low idle to
The engine speed will accelerate automatically from low idle to
2000 rpm at a rate of 100 rpm/s. The engine speed shall be
2000 rpm at a rate of 100 rpm/s. The engine speed shall be
maintained for a period of 15 to 25 minutes depending on the initial
maintained for a period of 15 to 25 minutes depending on the initial
soot load. Once the regeneration has completed the engine will
soot load. Once the regeneration has completed the engine will
drop to low idle.
drop to low idle.
The HEST warning lamp will light ON during the DPF regeneration.
The HEST warning lamp will light OFF 1 minute after the DPF
regeneration is completed.
To stop a manual DPF regeneration before it has completed, set
To stop a manual DPF regeneration before it has completed, set
the DPF switch to Inhibit position (II) or turn OFF the engine.
the DPF switch to Inhibit position (II) or turn OFF the engine.
①
②
③
④
⑤
①
②
③
④
⑤
※
※
※
Unlock
Lock
I
II
130ZF3CD10-4
130ZF3CD221
130ZF3CD221
HEST warning lamp ON
HEST warning lamp OFF
Summary of Contents for HX130 LCR
Page 11: ...1 1 SECTION 1 GENERAL Group 1 Safety Hints 1 1 Group 2 Specifications 1 10 ...
Page 174: ...4 5 MEMORANDUM HYUNDAI HEAVY INDUSTRIES CO LTD CONSTRUCTION EQUIPMENT DIV ...
Page 536: ...8 108 125LCR8TM30 Turn casing 1 upside down and remove oil seal 3 using jig 29 ...
Page 566: ...8 138 Remove lock nut 22 and then boot 23 14 36078RL14 2507ARL10 ...