1-27
SELECTION OF TRACK SHOE
SELECTION OF TRACK SHOE
Suitable track shoes should be selected according to operating conditions.
Method of selecting shoes
Method of selecting shoes
Confirm the category from the list of applications in table
table 2
2, then use table
table 1
1 to select the
shoe. Wide shoes (Categories B and C) have limitations on applications. Before using wide
shoes, check the precautions, then investigate and study the operating conditions to confirm
if these shoes are suitable.
Select the narrowest shoe possible to meet the required flotation and ground pressure.
Application of wider shoes than recommendations will cause unexpected problem such as
bending of shoes, crack of link, breakage of pin, loosening of shoe bolts and the other
various problems.
4)
4)
※
Table 2
Table 2
※
Table 1
Table 1
Track shoe
Specification
Category
500 mm triple grouser
Standard
A
600 mm triple grouser
Option
A
700 mm triple grouser
Option
B
Category
Applications
Applications
A
Rocky ground,
river beds,
normal soil
·
Travel at low speed on rough ground with large obstacles such as
boulders or fallen trees
B
Normal soil,
soft ground
·
·
·
These shoes cannot be used on rough ground with large obstacles such
as boulders or fallen trees
Travel at high speed only on flat ground
Travel slowly at low speed if it is impossible to avoid going over obstacles
Summary of Contents for HX130 LCR
Page 11: ...1 1 SECTION 1 GENERAL Group 1 Safety Hints 1 1 Group 2 Specifications 1 10 ...
Page 174: ...4 5 MEMORANDUM HYUNDAI HEAVY INDUSTRIES CO LTD CONSTRUCTION EQUIPMENT DIV ...
Page 536: ...8 108 125LCR8TM30 Turn casing 1 upside down and remove oil seal 3 using jig 29 ...
Page 566: ...8 138 Remove lock nut 22 and then boot 23 14 36078RL14 2507ARL10 ...