8-15
Remove hexagon socket head bolts (406)
and then seal cover (F, 261).
In the case removing it is difficult, and
hooking pull thin rod into notch, and the
cover can be removed easily.
Since oil seal is fitted on seal cover (F)
(261), take care not to damage it at
removing the cover.
(11)
※
※
140Z98MP18
Tapping shaft ends of drive shaft (111,
113) lightly with plastic hammer, remove it
from pump casing (271, 272).
(12)
140Z98MP19
Remove shoe plate (211) and swash
plate (212) from pump casing (271, 272).
(13)
140Z98MP20
Insert thin steel bar into the hole and
remove the lock pin (255) from pump
casing (271, 272).
When holding with thin steel bar, do not
confuse the unlocking hole with the arc
shaped oil passage.
(14)
※
140Z98MP21
Summary of Contents for HX130 LCR
Page 11: ...1 1 SECTION 1 GENERAL Group 1 Safety Hints 1 1 Group 2 Specifications 1 10 ...
Page 174: ...4 5 MEMORANDUM HYUNDAI HEAVY INDUSTRIES CO LTD CONSTRUCTION EQUIPMENT DIV ...
Page 536: ...8 108 125LCR8TM30 Turn casing 1 upside down and remove oil seal 3 using jig 29 ...
Page 566: ...8 138 Remove lock nut 22 and then boot 23 14 36078RL14 2507ARL10 ...