![background image](http://html1.mh-extra.com/html/hyundai/hx130-lcr/hx130-lcr_manual_2196326270.webp)
5-43
J1939 Code
Description
Refer to Procedure
652-21
Engine Injector Cylinder #02 : Data Drifted Low
Injector Data Incorrect - Test
653-5
Engine Injector Cylinder #03 : Current Below
Normal
Injector Solenoid - Test
653-6
Engine Injector Cylinder #03 : Current Above
Normal
Injector Solenoid - Test
653-20
Engine Injector Cylinder #03 : Data Drifted High
Injector Data Incorrect - Test
653-21
Engine Injector Cylinder #03 : Data Drifted Low
Injector Data Incorrect - Test
654-5
Engine Injector Cylinder #04 : Current Below
Normal
Injector Solenoid - Test
654-6
Engine Injector Cylinder #04 : Current Above
Normal
Injector Solenoid - Test
654-20
Engine Injector Cylinder #04 : Data Drifted High
Injector Data Incorrect - Test
654-21
Engine Injector Cylinder #04 : Data Drifted Low
Injector Data Incorrect - Test
676-5
Engine Glow Plug Relay : Current Below Normal
Glow Plug Starting Aid - Test
676-6
Engine Glow Plug Relay : Current Above Normal
Glow Plug Starting Aid - Test
676-19
Engine Glow Plug Relay : Data Error
Glow Plug Starting Aid - Test
677-3
Engine Starter Motor Relay : Voltage Above Normal Relay - Test (Start Relay)
677-5
Engine Starter Motor Relay : Current Below Normal Relay - Test (Start Relay)
677-6
Engine Starter Motor Relay : Current Above Normal Relay - Test (Start Relay)
723-8
Engine Speed Sensor #2 : Abnormal Frequency,
Pulse Width, or Period
Speed/Timing - Test
970-31
Engine Auxiliary Shutdown Switch
This code indicates that the shutdown switch
for the engine has been activated.
The ECM will disable fuel injection until
the switch has been deactivated. No
troubleshooting is required.
976-2
PTO Governor State : Erratic, Intermittent, or
Incorrect
Power Take-Off - Test
1041-2
Start Signal Indicator : Erratic, Intermittent, or
Incorrect
Relay - Test (Start Relay)
1076-2
Engine Fuel Injection Pump Fuel Control Valve :
Erratic, Intermittent, or Incorrect
Solenoid Valve - Test
1076-5
Engine Fuel Injection Pump Fuel Control Valve :
Current Below Normal
Solenoid Valve - Test
1076-6
Engine Fuel Injection Pump Fuel Control Valve :
Current Above Normal
Solenoid Valve - Test
1081-5
Engine Wait to Start Lamp : Current Below Normal
Indicator Lamp - Test
1081-6
Engine Wait to Start Lamp : Current Above Normal Indicator Lamp - Test
※
Some fault codes are not applied to this machine.
Summary of Contents for HX130 LCR
Page 11: ...1 1 SECTION 1 GENERAL Group 1 Safety Hints 1 1 Group 2 Specifications 1 10 ...
Page 174: ...4 5 MEMORANDUM HYUNDAI HEAVY INDUSTRIES CO LTD CONSTRUCTION EQUIPMENT DIV ...
Page 536: ...8 108 125LCR8TM30 Turn casing 1 upside down and remove oil seal 3 using jig 29 ...
Page 566: ...8 138 Remove lock nut 22 and then boot 23 14 36078RL14 2507ARL10 ...