![background image](http://html1.mh-extra.com/html/hyundai/hx130-lcr/hx130-lcr_manual_2196326442.webp)
8-14
Remove flange socket (435) and remove
gear pump (04).
(7)
140Z98MP14
140Z98MP15
Loosen hexagon socket head bolt (401)
which tighten pump casing (271, 272) and
valve block (312).
(8)
140Z98MP16
Place pump horizontally on workbench
with its regulator fitting surface down, and
separate pump casing (271,272) from
valve block (312).
Remove 1st gear (116) when separating
pump casing from valve block (312) too.
(9)
※
Pull out cylinder (141), pistons (151), set
screw (153), spherical bush (156) and
cylinder springs (157) simultaneously
from pump casing (271, 272) straightly
over drive shaft (111, 113).
Take care not to damage sliding surface
of cylinder (141), spherical bush (156),
shoes (152), swash plate (212), etc.
(10)
※
140Z98MP17
Summary of Contents for HX130 LCR
Page 11: ...1 1 SECTION 1 GENERAL Group 1 Safety Hints 1 1 Group 2 Specifications 1 10 ...
Page 174: ...4 5 MEMORANDUM HYUNDAI HEAVY INDUSTRIES CO LTD CONSTRUCTION EQUIPMENT DIV ...
Page 536: ...8 108 125LCR8TM30 Turn casing 1 upside down and remove oil seal 3 using jig 29 ...
Page 566: ...8 138 Remove lock nut 22 and then boot 23 14 36078RL14 2507ARL10 ...