8-126
After assembling nut ring (62) by using the jig,
disassemble the clamping.
Tightening torque : 60 kgf · m (434 lbf · ft)
Place lock plate (63) on the nut ring groove.
Select best position from one of 4 casing hole to
assemble lock plate.
11)
※
12)
※
Place lock plate th the direction which nut ring is
loosed and then assemble M10 bolt (89) with M8
screw (77) after spreading loctite #242. (Refer to
assembly detail drawing)
Tightening torque (M10) : 5.5
±
0.6 kgf · m
(39.8
±
4.3 lbf · ft)
Tightening torque (M8) : 2.7
±
0.3 kgf · m
(19.5
±
2.2 lbf · ft)
Make sure that M8 screw doesn't stick out of lock
plate.
Assembly detail drawing lock plate.
13)
※
※
※
※
125LCR8TM100
125LCR8TM102
125LCR8TM101
125LCR8TM103
Summary of Contents for HX130 LCR
Page 11: ...1 1 SECTION 1 GENERAL Group 1 Safety Hints 1 1 Group 2 Specifications 1 10 ...
Page 174: ...4 5 MEMORANDUM HYUNDAI HEAVY INDUSTRIES CO LTD CONSTRUCTION EQUIPMENT DIV ...
Page 536: ...8 108 125LCR8TM30 Turn casing 1 upside down and remove oil seal 3 using jig 29 ...
Page 566: ...8 138 Remove lock nut 22 and then boot 23 14 36078RL14 2507ARL10 ...