![background image](http://html1.mh-extra.com/html/hyundai/hx130-lcr/hx130-lcr_manual_2196326606.webp)
8-178
Disassembly
Apply pressure on spring (3) with a
press.
The spring is under a large installed load.
This is dangerous, so be sure to set
properly.
·
Spring set load : 8497 kg (18733 lb)
Remove bolt (7), spring washer (8) and
lock plate (6).
Remove lock nut (5).
Take enough notice so that the press
which pushes down the spring, should
not be slipped out in its operation.
Lighten the press load slowly and
remove bracket (4) and spring (3).
1
12
13
4
7, 8
6
5
Press
3
1
11
10
9
(2)
Remove rod seal (9), back up ring (10)
and dust seal (11).
⑦
Remove rod (12) from body (1).
Remove grease valve (13) from rod (12).
⑤
⑥
①
※
②
③
④
130ZF8UC31
130ZF8UC32
130ZF8UC33
Summary of Contents for HX130 LCR
Page 11: ...1 1 SECTION 1 GENERAL Group 1 Safety Hints 1 1 Group 2 Specifications 1 10 ...
Page 174: ...4 5 MEMORANDUM HYUNDAI HEAVY INDUSTRIES CO LTD CONSTRUCTION EQUIPMENT DIV ...
Page 536: ...8 108 125LCR8TM30 Turn casing 1 upside down and remove oil seal 3 using jig 29 ...
Page 566: ...8 138 Remove lock nut 22 and then boot 23 14 36078RL14 2507ARL10 ...