![background image](http://html1.mh-extra.com/html/hyundai/hx130-lcr/hx130-lcr_manual_2196326441.webp)
8-13
DISASSEMBLY
Select place suitable to disassembling.
Select clean place.
Spread rubber sheet, cloth or so on
overhaul workbench top to prevent parts
from being damaged.
Remove dust, rust, etc, from pump
surfaces with cleaning oil or so on.
Remove drain port plug (468) and drain oil
pump casing (271, 272).
3)
(1)
※
※
(2)
(3)
Place pump horizontally on workbench
with its regulator fitting surface down, and
remove flange socket (435) and remove
PTO unit (05).
Be careful about the attaching direction of
the PTO unit (05).
Before bringing regulator fitting surface
down, spread rubber sheet on workbench
without fail to prevent this surface from
being damaged.
(5)
※
※
Remove hexagon socket head bolts (412,
413) and remove regulator.
(4)
140Z98MP11
140Z98MP12
140Z98MP13
In case the pump is provided without the
PTO unit (05), remove the cover (262) with
the hexagon socket head cap screws
(414).
(6)
Summary of Contents for HX130 LCR
Page 11: ...1 1 SECTION 1 GENERAL Group 1 Safety Hints 1 1 Group 2 Specifications 1 10 ...
Page 174: ...4 5 MEMORANDUM HYUNDAI HEAVY INDUSTRIES CO LTD CONSTRUCTION EQUIPMENT DIV ...
Page 536: ...8 108 125LCR8TM30 Turn casing 1 upside down and remove oil seal 3 using jig 29 ...
Page 566: ...8 138 Remove lock nut 22 and then boot 23 14 36078RL14 2507ARL10 ...