8-31
Install cover (C, 629) fitted with adjusting
screws (628), adjusting ring (C, 627), lock
nut (630), hexagon nut (801) and
adjusting screw (924).
Then tighten them with hexagonal socket
head screws (438).
This completes assembly.
(13)
Put spring seat (644), pilot spring (646)
and adjusting ring (Q, 645) into pilot hole.
Then fix spring seat (624), inner spring
(626) and outer spring (625) into
compensating hole.
When fitting spring seat, take care not to
mistake direction of spring seat.
(12)
※
Fit set spring (655) to spool hole and put
compensating piston (621) and piston
case (622) into compensating hole.
Fit pilot cover (641) and tighten it with
hexagonal socket head screws (437,
438).
(11)
(210-7) REG14
(210-7) REG15
(210-7) REG16
Summary of Contents for HX130 LCR
Page 11: ...1 1 SECTION 1 GENERAL Group 1 Safety Hints 1 1 Group 2 Specifications 1 10 ...
Page 174: ...4 5 MEMORANDUM HYUNDAI HEAVY INDUSTRIES CO LTD CONSTRUCTION EQUIPMENT DIV ...
Page 536: ...8 108 125LCR8TM30 Turn casing 1 upside down and remove oil seal 3 using jig 29 ...
Page 566: ...8 138 Remove lock nut 22 and then boot 23 14 36078RL14 2507ARL10 ...