![background image](http://html1.mh-extra.com/html/hyundai/hx130-lcr/hx130-lcr_manual_2196326116.webp)
2-72
Counterbalance operation
Counterbalance operation is required to decelerate slowly the hydraulic motor while absorbing
inertia force.
In case the hydraulic oil is gradually decreased from pump to VB port, the drive shaft of hydraulic
motor tends to rotate faster than that matched to the volume of oil supply.
Consequently, the pilot chamber pressure on MB to VB side decreases and the spring (33) force
moves the spool (31) leftwards towards neutral position.
Therefore, the area of passage from MA to VA becomes smaller and the pressure on MA side
rises due to increased resistance in the passage and the motor receives hydraulic braking effect.
If the motor rotates slower than that matched to the volume of supplied oil, the pilot chamber
pressure on VB port increases, and spool (31) moves rightwards to enlarge the area of passage
from MA to VA. Therefore the braking effect becomes smaller and the rotational speed of motor
is controlled to correspond to the volume of supplied oil.
In order to give stable counterbalance operation, the restrictors (34) are set in the pilot chamber
to damp the spool (31) movement.
The parking brake is released during pressure adjusting action of the spool (31).
④
VB
VA
VB
VA
MB
MA
MB
MA
DR
DR
125LCR2TM32
Summary of Contents for HX130 LCR
Page 11: ...1 1 SECTION 1 GENERAL Group 1 Safety Hints 1 1 Group 2 Specifications 1 10 ...
Page 174: ...4 5 MEMORANDUM HYUNDAI HEAVY INDUSTRIES CO LTD CONSTRUCTION EQUIPMENT DIV ...
Page 536: ...8 108 125LCR8TM30 Turn casing 1 upside down and remove oil seal 3 using jig 29 ...
Page 566: ...8 138 Remove lock nut 22 and then boot 23 14 36078RL14 2507ARL10 ...