![background image](http://html1.mh-extra.com/html/hyundai/hx130-lcr/hx130-lcr_manual_2196326529.webp)
8-101
DISASSEMBLY
Choose a clean place, remove contaminants
(dust, etc) and cleans motor before placing it on
worktable.
Lay the rubber plate on worktable and take care
not to damage the component.
Disassemble parallel pin (43) and spring (44).
Do not lose spring.
Do not mix spring with other springs.
(1)
※
(4)
※
※
Remove plug (41) using 21 mm socket wrench.
(3)
Remove the connector (45) using 21 mm socket
wrench.
(2)
2)
125LCR8TM03
125LCR8TM02
125LCR8TM04
125LCR8TM05
Summary of Contents for HX130 LCR
Page 11: ...1 1 SECTION 1 GENERAL Group 1 Safety Hints 1 1 Group 2 Specifications 1 10 ...
Page 174: ...4 5 MEMORANDUM HYUNDAI HEAVY INDUSTRIES CO LTD CONSTRUCTION EQUIPMENT DIV ...
Page 536: ...8 108 125LCR8TM30 Turn casing 1 upside down and remove oil seal 3 using jig 29 ...
Page 566: ...8 138 Remove lock nut 22 and then boot 23 14 36078RL14 2507ARL10 ...