![background image](http://html1.mh-extra.com/html/hyundai/hx130-lcr/hx130-lcr_manual_2196326447.webp)
8-19
Fit valve plate (313, 314) to valve block
(312), spring pin (886) into pin hole.
Take care not to mistake suction / delivery
direction of valve plate (312).
(7)
※
140Z98MP28
Place pump horizontally on workbench
with its regulator fitting surface down, and
attach pump casing (271, 272) to valve
b l o c k ( 3 1 2 ) . F i t 1 s t g e a r ( 1 1 6 )
simultaneously.
Before bringing regulator fitting surface
down, spread rubber sheet on workbench
without fail to prevent this surface from
being damaged.
Take care not to mistake direction of valve
block (312). [Clockwise rotation (viewed
from input shaft side)]. Fit the valve block
(312) with suction flange left when
regulator side below, viewed from front
side.
(8)
※
※
140Z98MP29
Fix valve block (312) to pump casing
(271, 272) with hexagon socket head
bolts (401).
(9)
140Z98MP30
Fit gear pump (04) to pump casing (272)
with hexagon socket head bolts (435).
(10)
140Z98MP31
Summary of Contents for HX130 LCR
Page 11: ...1 1 SECTION 1 GENERAL Group 1 Safety Hints 1 1 Group 2 Specifications 1 10 ...
Page 174: ...4 5 MEMORANDUM HYUNDAI HEAVY INDUSTRIES CO LTD CONSTRUCTION EQUIPMENT DIV ...
Page 536: ...8 108 125LCR8TM30 Turn casing 1 upside down and remove oil seal 3 using jig 29 ...
Page 566: ...8 138 Remove lock nut 22 and then boot 23 14 36078RL14 2507ARL10 ...