![background image](http://html1.mh-extra.com/html/hyundai/hx130-lcr/hx130-lcr_manual_2196326300.webp)
5-72
User mode switch
290F3CD89
(3)
This switch is used to memorize the current machine operating
status in the MCU and activate the memorized user mode.
·
Memory : Push more than 2 seconds.
·
Action
: Push within 2 seconds.
·
Cancel : Push this switch once more within 2 seconds.
Refer to the page 5-76 for another set of user mode.
①
②
This switch is used to select the travel speed alternatively.
·
: Low speed
·
: High speed
Do not change the setting of the travel speed switch. Machine
stability may be adversely affected.
Personal injury can result from sudden changes in machine
stability.
Travel speed switch
①
※
290F3CD91
(4)
This switch is used to activate or cancel the auto idle function.
·
Pilot lamp ON : Auto idle function is activated.
·
Pilot lamp OFF : Auto idle function is cancelled.
The buzzer sounds when the machine has a problem.
In this case, push this switch and buzzer stops, but the
warning lamp blinks until the problem is cleared.
This switch is used to operate the work light.
The pilot lamp is turned ON when operating the switch.
Auto idle/ buzzer stop switch
Work light switch
①
②
①
②
(5)
(7)
290F3CD90
290F3CD93
This switch is used to return to the previous menu or parent
menu.
In the operation screen, pushing this switch will display the
view of the camera on the machine (if equipped).
Please refer to page 5-88 for the camera.
If the camera is not installed, this switch is used only ESC
function.
Escape/Camera switch
①
②
③
290F3CD92
(6)
Summary of Contents for HX130 LCR
Page 11: ...1 1 SECTION 1 GENERAL Group 1 Safety Hints 1 1 Group 2 Specifications 1 10 ...
Page 174: ...4 5 MEMORANDUM HYUNDAI HEAVY INDUSTRIES CO LTD CONSTRUCTION EQUIPMENT DIV ...
Page 536: ...8 108 125LCR8TM30 Turn casing 1 upside down and remove oil seal 3 using jig 29 ...
Page 566: ...8 138 Remove lock nut 22 and then boot 23 14 36078RL14 2507ARL10 ...