![background image](http://html1.mh-extra.com/html/hyundai/hx130-lcr/hx130-lcr_manual_2196326607.webp)
8-179
Assembly
Install dust seal (11), back up ring (10)
and rod seal (9) to body (1).
When installing dust seal (11) and rod
seal (9), take full care so as not to
damage the lip.
1
12
13
4
Press
3
(3)
※
1
11
10
9
Install spring (3) and bracket (4) to body
(1).
Apply pressure to spring (3) with a press
and tighten lock nut (5).
Apply sealant before assembling.
During the operation, pay attention
specially to prevent the press from
slipping out.
④
⑤
※
※
Pour grease into body (1), then push in
rod (12) by hand.
After take grease out of grease valve
mounting hole, let air out.
If air letting is not sufficient, it may be
difficult to adjust the tension of crawler.
Fit grease valve (13) to rod (12).
·
Tightening torque : 13.0
±
0.5 kgf
·
m
(94.0
±
3.6 lbf
·
ft)
②
※
③
130ZF8UC33
130ZF8UC34
130ZF8UC35
Summary of Contents for HX130 LCR
Page 11: ...1 1 SECTION 1 GENERAL Group 1 Safety Hints 1 1 Group 2 Specifications 1 10 ...
Page 174: ...4 5 MEMORANDUM HYUNDAI HEAVY INDUSTRIES CO LTD CONSTRUCTION EQUIPMENT DIV ...
Page 536: ...8 108 125LCR8TM30 Turn casing 1 upside down and remove oil seal 3 using jig 29 ...
Page 566: ...8 138 Remove lock nut 22 and then boot 23 14 36078RL14 2507ARL10 ...