manualshive.com logo in svg

Huawei SmartAX MA5600T, Configuration Manual

The Huawei SmartAX MA5600T is a high-performance telecommunications product designed to meet the growing demands for broadband services. To access detailed instructions on using this device, you can download the user manual for free from our website. Get the most out of your Huawei SmartAX MA5600T with our comprehensive manual, available at manualshive.com.

Share
Download
background image

9.7.1.4 Configuring the Internet Access Service..............................................................................................................585
9.7.1.5 Configuring the H.248-based Voice Service (on a Web Page or the U2000)......................................................588
9.7.1.6 Configuring the H.248-based Voice Service (Through the CLI).........................................................................598
9.7.1.7 Configuring the SIP-based Voice Service (on a Web Page or the U2000)..........................................................602
9.7.1.8 Configuring the SIP-based Voice Service (Through the CLI).............................................................................611
9.7.1.9 Configuring the BTV Service...............................................................................................................................616
9.7.1.10 Configuring the VoD Service.............................................................................................................................619
9.7.1.11 Configuring Link Aggregation, Congestion Control, and Security Policies......................................................621
9.7.1.12 Verifying Services..............................................................................................................................................624
9.7.2 Bridging ONT + HGW Network Scenario..............................................................................................................629
9.7.2.1 Service Requirements and Application Scenario.................................................................................................629
9.7.2.2 Configuration Process...........................................................................................................................................630
9.7.2.3 Adding an ONT to an OLT...................................................................................................................................631
9.7.2.4 Configuring the Internet Access Service..............................................................................................................635
9.7.2.5 Configuring the Voice Service.............................................................................................................................638
9.7.2.6 Configuring the BTV Service...............................................................................................................................641
9.7.2.7 Configuring the VoD Service...............................................................................................................................645
9.7.2.8 Configuring Link Aggregation, Congestion Control, and Security Policy..........................................................648
9.7.2.9 Verifying Services................................................................................................................................................651
9.7.3 Gateway ONT Network Scenario............................................................................................................................656
9.7.3.1 Service Requirements and Application Scenario.................................................................................................656
9.7.3.2 Configuration Process...........................................................................................................................................657
9.7.3.3 Adding an ONT to an OLT...................................................................................................................................659
9.7.3.4 Configuring the Internet Access Service (on a Web Page or the U2000)............................................................663
9.7.3.5 Configuring the H.248-based Voice Service (on a Web Page or the U2000) .....................................................669
9.7.3.6 Configuring the H.248-based Voice Service (Through the CLI).........................................................................679
9.7.3.7 Configuring the SIP-based Voice Service (on a Web Page or the U2000)..........................................................683
9.7.3.8 Configuring the SIP-based Voice Service (Through the CLI).............................................................................692
9.7.3.9 Configuring the BTV Service...............................................................................................................................697
9.7.3.10 Configuring the VoD Service.............................................................................................................................700
9.7.3.11 Configuring Link Aggregation, Congestion Control, and Security Policy........................................................702
9.7.3.12 Verifying Services..............................................................................................................................................705
9.7.4 Configuring Triple Play Service (Simplified Mode)...............................................................................................710
9.8 P2P Access: Configuring FTTH Service....................................................................................................................717

10 FTTD Configuration...............................................................................................................724

10.1 FTTD Service Overview..........................................................................................................................................725
10.2 Basic Concepts.........................................................................................................................................................725
10.3 Networking Scenarios and Hardware Configurations (GPON)................................................................................727
10.4 Reference of GPON ONU Capability Sets...............................................................................................................730
10.5 Principle of FTTD Data Plan....................................................................................................................................731
10.5.1 Data Plan Principles for IP Addresses...................................................................................................................731

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide

Contents

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

x

Summary of Contents for SmartAX MA5600T




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SmartAX MA5600T

Hansen HS2 Specifications, Applications, Service Instructions & Parts preview
HS2
Brand: Hansen Pages: 4
Rain Bird IQ Installation & User Manual preview
IQ
Brand: Rain Bird Pages: 48
Fairchild 63 Installation, Operation And Maintenance Instructions preview
63
Brand: Fairchild Pages: 2
Fagor 101 Operating Manual preview
101
Brand: Fagor Pages: 103
Barthelme CHROMOFLEX RC Instruction Manual preview
CHROMOFLEX RC
Brand: Barthelme Pages: 8
CAB SHADE User Handbook Manual preview
SHADE
Brand: CAB Pages: 28
C-TEC CAST XFP Commissioning & Programming Quick Start Manual preview
CAST XFP
Brand: C-TEC Pages: 16
C&T Solution MX100 Series User Manual preview
MX100 Series
Brand: C&T Solution Pages: 27
C&K systems SECURIT ST800L+ Installation Manual preview
SECURIT ST800L+
Brand: C&K systems Pages: 16
Gardena Master Operator'S Manual preview
Master
Brand: Gardena Pages: 18
Danfoss VLT Micro Drive FC 51 Series Quick Manual preview
VLT Micro Drive FC 51 Series
Brand: Danfoss Pages: 23
Garmin TR-1 Gold Installation Instructions preview
TR-1 Gold
Brand: Garmin Pages: 4
Jabra LINK 280 - User Manual preview
LINK 280 -
Brand: Jabra Pages: 8
U-Prox IC L Installations preview
IC L
Brand: U-Prox Pages: 3
Vag CEREX 300-L Operation & Maintenance Instructions Manual preview
CEREX 300-L
Brand: Vag Pages: 15
G-Force UNDER CONTROL CP-30A PILOT User Manual preview
UNDER CONTROL CP-30A PILOT
Brand: G-Force Pages: 2
Belimo LF24-SR-E US Manual preview
LF24-SR-E US
Brand: Belimo Pages: 2
Watts AMES 650GD Installation, Operation And Maintenance Manual preview
AMES 650GD
Brand: Watts Pages: 12

Brands by name

Popular brands

Load more brands