–
Select
Enable Line Name
to enable the voice user configuration.
c.
Click
Apply
to apply the configuration.
d.
In the right pane, click
New
to add voice user 2, and configure the parameters of
voice user 2 as follows:
–
Line Name: A1
–
Associated POTS: 2 (binding port TEL2 on the ONU)
–
Select
Enable Line Name
to enable the voice user configuration.
e.
Click
Apply
to apply the configuration.
NOTE
l
The terminal IDs
A0
and
A1
must be consistent with the corresponding configuration on the
MGC.
l
If
Associated POTS
is
1
, port TEL1 on the ONU is bound. If
Associated POTS
is
2
, port TEL2
on the ONU is bound.
5.
(Optional) Configure a route.
Perform this operation if the IP address of the ONU and the IP address of the voice
server are in different network segments.
a.
Choose
Route
>
Default Route Configuration
from the main menu.
b.
Select
Enable the default route
and set
WAN name
to
1_VOIP_R_VID_300
.
Figure 12-7
Configuring a route
c.
Click
Apply
to apply the configuration.
6.
Save the configuration.
In the navigation tree, choose
System Tools
>
Configuration File
. In the right pane,
click
Save Configuration
to save the configuration.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
12 FTTO Configuration(SOHO and SME)
Issue 01 (2014-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1157
