huawei(config-mvlan1000)#
igmp mode proxy
Are you sure to change IGMP mode?(y/n)[n]:
y
6.
Configure an IGMP upstream port.
Set the IGMP upstream port to port 0/19/0.
huawei(config-mvlan1000)#
igmp uplink-port 0/19/0
7.
Configure a program library.
Set the multicast IP address range to 224.1.1.10-224.1.1.100 and the IP address of the
multicast server to 10.10.10.10.
huawei(config-mvlan1000)#
igmp program add batch ip 224.1.1.10 to-ip
224.1.1.100 sourceip 10.10.10.10
----End
11.3.3.6 Configuring the Internet Access Service (LAN Access, on the ONU)
This topic describes how to configure the Internet access service for home gateway (HGW) users
on an optical network unit (ONU) when HGWs are connected upstream to the ONU through
local area networks (LANs).
Data Plan
The following table provides key information about the Internet access service (LAN access).
Item
Data
Remarks
Traffic
profile
ID: 8
CIR: 4 Mbit/s
VLAN priority: 0
Downstream priority policy:
local-setting
-
User
VLAN
Untagged
HGWs can send untagged packets or packets
with user VLAN tags.
User VLAN ID: 1, 2, 3...
Procedure
Step 1
Log in to the ONU to perform the configuration.
You can remote log in to the ONU from the OLT to perform the configuration. User name:
root
(default). Password:
mduadmin
(default).
Step 2
Configure a traffic profile.
You can run the
display traffic table ip
command to query the traffic profiles existing in the
system. If the traffic profiles existing in the system do not meet the requirements, you need to
run the
traffic table ip
command to add a traffic profile.
Add traffic profile 8 and set the committed information rate (CIR) to 4 Mbit/s. The priority for
upstream packets is 0, and downstream packets are scheduled based on the priority specified in
the traffic profile.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
11 FTTB and FTTC Solution Configuration
Issue 01 (2014-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
934
