Huawei SmartAX MA5600T, Configuration Manual

Page: 31 / 1979

SN Item Description Remarks
One optical multiplexer/demultiplexer Used to test the input optical
power of a single-fiber bi-
directional optical port. It is a
meter with the multiplexing
and demultiplexing functions.
One data network performance
analyzer Used to test the input optical
power. It is used to transmit
data to simulate the
networking environment.
1.2.4 Planning Data
This topic describes the information to be collected about the hardware configuration,
networking, and data plan before the commissioning based on the engineering document. This
facilitates the data configuration.
Table 1-4 lists the data collected for the commissioning.
Table 1-4 Data checklist
SN Item Description
1 Hardware
configuration This includes but is not limited to the following:
l Types and slot distribution of the control board and
service boards
l Types and physical positions of the upstream ports
and the service ports
2 Networking and data
plan This includes but is not limited to the following:
l Networking mode
l
IP address assignment
l VLAN planning
3 DIP Switches
configuration
NOTE
Only the MA5600T
supports this operation.
l For details about the default settings of DIP switches
on the ESC board on the MA5600T, see
1.3.1.1
Checking the Settings of DIP Switches on the
H801ESC Board
.
l For details about the default settings of DIP switches
on the fan monitoring board on the MA5600T, see
1.3.1.2 Checking the Settings of DIP Switches on
the Fan Monitoring Board
.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
1 Commissioning
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6