manualshive.com logo in svg

Huawei SmartAX MA5600T, Configuration Manual

The Huawei SmartAX MA5600T is a high-performance telecommunications product designed to meet the growing demands for broadband services. To access detailed instructions on using this device, you can download the user manual for free from our website. Get the most out of your Huawei SmartAX MA5600T with our comprehensive manual, available at manualshive.com.

Share
Download
background image

  User-bridging                    

enable

             -                         

  IPoE VMAC                        NotConfig          -                         
  PPPoE VMAC                       NotConfig          -                         
  PPPoA VMAC                       NotConfig          -                         
  Mismatch IGMP packet policy      discard            -                         
  VMAC aging mode                  MAC-learning       -                         
  OSPF tunnel                      enable             -                         
  Layer-3 protocol tunnel          enable             -                         
  MAC-address learning fabric      enable             -                         
  DHCPv6 mode                      n/a                -                         
  DHCPv6 option                    enable             -                         
  PPPoA MAC mode                   NotConfig          -                         
  Anti-IPv6spoofing                enable             -                         
  IPv6 DAD proxy                   disable            -                         
  Bind route and ND                disable            -                         
  NS-reply function                disable            -                         
  ARP-reply function               disable            -                         
  DHCP relay-interface relay-agent NotConfig          -                         
  Multicast packet policy fabric   forward            -                         
  ---------------------------------------------------------------------         
  Binding VLAN list            : 

300

                                            

  ---------------------------------------------------------------------         

Step 2

Check whether the service port is normal.

huawei(config)#

display service-port vlan 300

{ <cr>|autosense<K>|sort-by<K> }:                                               
                                                                                
  Command:                                                                      
          display service-port vlan 300                                         
  Switch-Oriented Flow List                                                     
  ----------------------------------------------------------------------------  
  INDEX VLAN VLAN     PORT F/ S/ P VPI  VCI   FLOW  FLOW       RX   TX   STATE  
        ID   ATTR     TYPE                    TYPE  PARA                        
  ----------------------------------------------------------------------------  
     10  300 common   gpon 0/3 /1  1    12    vlan  300        -    -    

up

     

     11  300 common   gpon 0/3 /1  2    12    vlan  300        -    -    

up

     

  ----------------------------------------------------------------------------  
   Total : 2  (Up/Down :    2/0)
huawei(config)#

display statistics service-port 10

 Number of upstream bytes             : 1044794                                 
 Number of upstream packets           : 4522                                    
 Number of upstream discard packets   : 200                                     
 Number of downstream bytes           : 1351261                                 
 Number of downstream packets         : 4677                                    
 Number of downstream discard packets : 0  

Step 3

Check the connectivity between the PCs.
1.

Use the PCs to ping each other. If the PCs can ping each other successfully, the PCs are
reachable to each other.
For example, the IP addresses of PC1 and PC2 are 192.168.1.10 and 192.168.1.30
respectively. Ping PC2 on PC1. The expected result is as follows:

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide

13 FTTO Configuration (Large-sized Enterprise Access)

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

1286

Summary of Contents for SmartAX MA5600T




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SmartAX MA5600T

QUAD 34 Instruction Book preview
34
Brand: QUAD Pages: 17
fadini VIGILO 2250 Instruction Manual preview
VIGILO 2250
Brand: fadini Pages: 16
Water Specialist WS2H Manual preview
WS2H
Brand: Water Specialist Pages: 60
Zamel ROW-01 Quick Manual preview
ROW-01
Brand: Zamel Pages: 2
SYR 315.2 Instructions For Use preview
315.2
Brand: SYR Pages: 2
Eaton Cutler-Hammer LMR Instructions Manual preview
Cutler-Hammer LMR
Brand: Eaton Pages: 38
S&C IntelliCap Operation preview
IntelliCap
Brand: S&C Pages: 26
CELSYS Clip Studio TABMATE Instructions preview
Clip Studio TABMATE
Brand: CELSYS Pages: 2
MRMC MIMIC HRNDWHEELS Quick Start Manual preview
MIMIC HRNDWHEELS
Brand: MRMC Pages: 20
CORNING HX 2.5 GHz TDD Quick Installation Sheet preview
HX 2.5 GHz TDD
Brand: CORNING Pages: 12
Cardin Elettronica S486 Series Installation And Reference preview
S486 Series
Brand: Cardin Elettronica Pages: 56
LCT HQ-TJ-901 Operation Manual preview
HQ-TJ-901
Brand: LCT Pages: 5
Conductrix Wampfler 0832 Installation Instructions Manual preview
0832
Brand: Conductrix Wampfler Pages: 23
Carel E2V Installation preview
E2V
Brand: Carel Pages: 2
Timotion TBB5 User Manual preview
TBB5
Brand: Timotion Pages: 9
EOS Farblichtmodul Assembly Instruction Manual preview
Farblichtmodul
Brand: EOS Pages: 7
Bard W3RV2-R Literature Assembly preview
W3RV2-R
Brand: Bard Pages: 102
Vestil BOL-R Series Instruction Manual preview
BOL-R Series
Brand: Vestil Pages: 6

Brands by name

Popular brands

Load more brands