NOTE
l
The parameters of the SIP-based voice interface must be consistent with the corresponding
configuration on the softswitch.
l
If dual-homing is configured,
Proxy Server Address
below
Secondary Server
must be
configured.
l
If
Signaling Port
is empty, the parameter value is the same as
Media Port
. If the upper-
layer network requires isolation of media streams from signaling streams, create different
traffic streams for the media streams and signaling streams on the OLT, create different
WAN ports on the ONU, and bind the created WAN ports to
Media Port
and
Signaling
Port
. When the packet is forwarded from two WAN ports, the configured VLAN is carried
by default.
c.
Click
Apply
to apply the configuration.
4.
Configure parameters of the SIP-based voice users.
a.
In the navigation tree, choose
Voice
>
VoIP Basic Configuration
.
b.
In the right pane, configure parameters of voice user 1 as follows:
–
Register User Name: 80001234
–
Auth User Name: [email protected]
–
Password: iadtest1
–
Associated POTS: 1 (binding port TEL1 on the ONU)
–
Select
Enable
to enable the voice user configuration.
c.
Click
Apply
to apply the configuration.
d.
Register User Name: 80001235
e.
Auth User Name: [email protected]
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
12 FTTO Configuration(SOHO and SME)
Issue 01 (2014-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1123
