NOTE
To bind a LAN port to a WAN port, set
Physical Port Name
and
WAN Interface
Name
. The preceding figure shows that WAN 1 is bound to LAN 1.
To bind a WAN port to multiple LAN ports, set
Physical Port Name
to
LAN1,...,LANx
. For example, to bind WAN 1 to LAN 1 and LAN 2, set
Physical
Port Name
to
LAN1, LAN2
.
3)
Click
OK
.
2.
Bind a general VAS profile.
a.
In the Main Topology, double-click the required OLT in the
Physical Root
navigation tree; or right-click the required OLT and choose
NE Explorer
from
the shortcut menu.
b.
Choose
GPON
>
GPON Management
from the navigation tree.
c.
In the window on the right, choose
GPON ONU
.
d.
On the
GPON ONU
tab page, set the filter criteria or click
to display the
GPON ONUs.
e.
Select an ONT from the list, right-click, and choose
Bind General VAS
Profile
from the shortcut menu. In the dialog box that is displayed, select the
created profile, and click
OK
to complete profile binding.
3.
Configure the ONT value-added service.
a.
On the
GPON ONU
tab page, select an ONT, right-click, and choose
Configure
Value-Added Service
from the shortcut menu.
b.
Click the
Basic Parameters
tab in the dialog box that is displayed, select
WAN
Port
, set
User Name
to
iadtest@pppoe
, and set
Password
to
iadtest
. The user
name and password must be the same as those configured on the BRAS.
c.
Click
OK
. The configurations take effect without the requirement of resetting
the ONT.
----End
9.7.3.5 Configuring the H.248-based Voice Service (on a Web Page or the U2000)
The OLT is connected to the remote ONT through a GPON port to provide users with the IP-
based high-quality and low-cost VoIP service.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
9 FTTH Configuration
Issue 01 (2014-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
669
