manualshive.com logo in svg

Huawei NetCol5000-C030 Series, User Manual

Introducing the Huawei NetCol5000-C030 Series, a cutting-edge cooling solution for data centers. Enhance your facility's efficiency with our state-of-the-art product. To swiftly set up and optimize your cooling system, download the comprehensive and free Quick Manual from manualshive.com. Experience seamless operations with this user-friendly manual at your fingertips.

Share
Download
background image

Step 2 After the initial power-on, the Quick Settings screen is displayed. Log in as user

admin.

Figure 4-1 Initial power-on

Table 4-1 Preset passwords

User

Preset Password

Permission Description

admin

(administrator

user)

000001

Can set all the menus.

operator (common

user)

000001

Can only view parameters and set

some parameters.

 

NO TICE

● User operator can access customer and delivery parameters. The parameters

on the Advanced menu are delivery parameters. User admin can access

customer, delivery, maintenance, and R&D parameters. The parameters on the

Advanced menu are R&D parameters.

● To prevent the effect of misoperations on the system, log in as user operator

before modifying parameters. Confirm with Huawei technical support before

modifying parameters which cannot be modified by user operator. Otherwise,

Huawei will not be liable for any consequences of the modification performed

by the user.

● Only certified professionals are allowed to modify the advanced parameters.

Unauthorized modifications may lead to device malfunction or damage.

● After the first login, change the password in time to ensure account security

and prevent unauthorized network attacks, such as data tampering. Huawei

will not be liable for any security issues caused by your failure to change the

default password in time or password loss after changing.

● After login, you are allowed to perform operations until being logged out if no

operation is performed within 3 minutes (user set). For security purposes, tap

 at the lower-right corner of the screen, and tap 

 or 

 at the

upper-right corner of the screen to manually log out after you have completed

all operations.

NetCol5000-C(030, 032, 065) In-row Chilled Water

Smart Cooling Product

User Manual

4 Power-On Commissioning

Issue 04 (2021-03-15)

Copyright © Huawei Technologies Co., Ltd.

84

Summary of Contents for NetCol5000-C030 Series
























































































































































































































Reviews:

No comments

Related manuals for NetCol5000-C030 Series

QC Conveyors INDUSTRIAL Series Installation & Maintenance Instructions Manual preview
INDUSTRIAL Series
Brand: QC Conveyors Pages: 44
Veeder-Root HydrX Replacement Instructions preview
HydrX
Brand: Veeder-Root Pages: 2
aci aSENSE RL Installation And Operation Instructions preview
aSENSE RL
Brand: aci Pages: 4
RAB HIGH BAY Series Instructions preview
HIGH BAY Series
Brand: RAB Pages: 2
Panasonic PX-2 Series Instruction Manual preview
PX-2 Series
Brand: Panasonic Pages: 4
Daikin DFC Series Installation Instructions Manual preview
DFC Series
Brand: Daikin Pages: 52
Lutron Electronics Limelight LL-EXTMOUNT-H Installation preview
Limelight LL-EXTMOUNT-H
Brand: Lutron Electronics Pages: 4
UPOWER Ecoline UE-48Li80 Manual preview
Ecoline UE-48Li80
Brand: UPOWER Pages: 6
Havis-Shields Silver Billet KR-800 Specifications preview
Silver Billet KR-800
Brand: Havis-Shields Pages: 1
Ikelite 9523.61 Instruction Manual preview
9523.61
Brand: Ikelite Pages: 4
Logik LUPAUSL13E Instruction Manual preview
LUPAUSL13E
Brand: Logik Pages: 52
Havis-Shields 1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28 Install Instructions preview
1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28
Brand: Havis-Shields Pages: 3
Cuisinart FP-SP Instruction And Recipe Booklet preview
FP-SP
Brand: Cuisinart Pages: 20
Speaka Professional SP-9370956 Operating Instructions Manual preview
SP-9370956
Brand: Speaka Professional Pages: 68
Uebler X21 nano Mounting And Operating Instructions preview
X21 nano
Brand: Uebler Pages: 56
MAXBOTIX MaxSonar Quick Start Manual preview
MaxSonar
Brand: MAXBOTIX Pages: 8
FAAM FLL 6V Series Operation Manual preview
FLL 6V Series
Brand: FAAM Pages: 19
Velleman LPP6 Quick Start Manual preview
LPP6
Brand: Velleman Pages: 4

Brands by name

Popular brands

Load more brands