Huawei NetCol5000-C030 Series User Manual Download Page 191

Page: 191 / 215

Procedure

Step 1 On the home screen, choose Alarms > Delete Hist Alarms.

Figure 7-13

displayed.

Figure 7-13 Deleting historical alarms

Step 2 Tap Confirm to delete all historical alarms.

NO TE

After alarms are deleted, the operation is recorded in logs.

----End

7.1.10 How Do I Clear Component Runtime?

Context

NO TICE

Performance value clearance can only be performed after component

maintenance. Otherwise, the component may run overtime and weaken

performance.

Procedure

Step 1 On the home screen, choose Maint > Performance Maint.

NetCol5000-C(030, 032, 065) In-row Chilled Water

Smart Cooling Product

User Manual

7 FAQ

Issue 04 (2021-03-15)

183

Summary of Contents for NetCol5000-C030 Series
























































































































































































































Search results

Summary of Contents for NetCol5000-C030 Series

Reviews:

Huawei NetCol5000-C030 Series, User Manual, Page: 191 / 215

Search results

Summary of Contents for NetCol5000-C030 Series

Reviews: