manualshive.com logo in svg

HP HP 8712ES, User Manual, Page: 398 / 507

Share
Download
HP HP 8712ES User Manual Download Page 398

8-92

ES User’s Guide

Hardkey/Softkey Reference

T

Softkey in the marker search menu. Toggle to ON if you want the
marker search functions to be updated with each sweep. When toggled
OFF (default setting), the functions are performed only once, when
selected.

See

“Using Markers” on page 4-3

 for more information.

Access Keys:

Softkey in the port extensions menu. Allows compensation for phase
shift due to an extended measurement reference plane on port 1.

 See

“Port Extensions” on page 5-18

 for more information.

Access Keys:

Softkey in the port extensions menu. Allows compensation for phase
shift due to an extended measurement reference plane on port 2.

 See

“Port Extensions” on page 5-18

 for more information.

Access Keys:

(Option 100 only) Softkey in the cable menu. Selects the S

21

 (forward

transmission) type of measurement.

See

“Using the BEGIN Key to Configure Measurements” on page 3-16

for more information.

Access Keys:

Softkey in the source

. Displays the menu with choices for

triggering the analyzer. The analyzer can be triggered continuously
(default setting) or once. It can be triggered internally (default setting),
externally, or externally one frequency point at a time.

Softkey in the trigger menu. Displays the menu for the choice of
internal or external triggering.

Access Keys:

 Tracking

 on OFF

MARKER

 Marker Search

 Port 1

 Extension

CAL

 More Cal  Port Extensions

 Port Ext’s on OFF

 Port 2

 Extension

CAL

 More Cal  Port Extensions

 Port Ext’s on OFF

 Transmissn

BEGIN

 Cable

 Trigger

MENU

 Trigger Source

MENU

 Trigger

Summary of Contents for HP 8712ES




























































































































































































































































































































































































































































































































Reviews:

No comments