manualshive.com logo in svg

HP HP 8712ES, User Manual, Page: 328 / 507

Share
Download
HP HP 8712ES User Manual Download Page 328

8-22

ES User’s Guide

Hardkey/Softkey Reference

D

Softkey in the define hardcopy menu. Displays the menu to define
which parts of the graph are to be printed or plotted: trace data,
graticule, annotation, marker symbol, title and clock, or combinations.

See

“Printing and Plotting Measurement Results” on page 4-78

.

Access Keys:

Softkey in the

 menu. Displays the menu to define the

hardcopy in terms of information to be copied. Default setting is

.

See

“Printing and Plotting Measurement Results” on page 4-78

.

Softkey in the

 menu. Displays the menu to define a

PCL5 printer in terms of color, orientation, autofeed, and margins.

See

“Connecting and Configuring Printers and Plotters” on page 4-68

for more information.

Softkey in the set pen numbers menu. Resets the plotter pen number
assignments to their default values.

See

“Define the Printer or Plotter Settings” on page 4-73

 for default

values.

Access Keys:

Softkey in the

 menu. Displays the menu to define the

plotter in terms of color, pen numbers, and autofeed.

See

“Connecting and Configuring Printers and Plotters” on page 4-68

for more information.

Softkey in the

 menu. Displays the menu to define the

printer in terms of color, orientation, autofeed, resolution, and
margins.

See

“Connecting and Configuring Printers and Plotters” on page 4-68

for more information.

 Define Graph

HARDCOPY

 Define Hardcopy

 Define

 Hardcopy

HARDCOPY

 Graph Only

 Define PCL5

HARDCOPY

 Default

 Pen Colors

HARDCOPY

 Define Plotter  Set Pen Numbers

 Define Plotter

HARDCOPY

 Define Printer

HARDCOPY

Summary of Contents for HP 8712ES




























































































































































































































































































































































































































































































































Reviews:

No comments