manualshive.com logo in svg

HP HP 8712ES, User Manual, Page: 169 / 507

Share
Download
HP HP 8712ES User Manual Download Page 169

ES User’s Guide

4-35

Using Instrument Functions

Using Limit Testing

Delta Amplitude

This marker limit test allows you to set marker 1 as an amplitude
reference against which marker 2 is limit tested.

1. This limit test requires that you first use marker 1 to determine the

reference amplitude: Press

, and then use the front

panel knob or the

 keys to place marker 1 at the desired

place on the measurement trace. The amplitude of marker 1 at this
point becomes the delta reference for this marker limit test.

2. Press

.

3. Use the front panel knob or the

 keys to select

Delta

Ampl

 in the marker limit test table. Turn this limit function on by

pressing the

 key. Note that the entry in the

on/off column of the table changes to "on."

4. Press

, and enter the

maximum limit using the front panel keypad and terminating the
entry with the

 key.

5. Press

, and

enter the minimum limit using the front panel keypad and
terminating the entry with the

 key.

Delta Frequency

This marker limit test allows you to set marker 1 as a frequency
reference against which marker 2 is limit tested.

1. This limit test requires that you first use marker 1 to determine the

reference frequency: Press

, and then use the front

panel knob or the

 keys to place marker 1 at the desired

place on the measurement trace. The frequency of marker 1 at this
point becomes the delta reference for this marker limit test.

2. Press

.

3. Use the front panel knob or the

 keys to select

Delta

Freq

 in the marker limit test table. Turn this limit function on by

pressing the

 key. Note that the entry in the

on/off column of the table changes to "on."

4. Press

, and enter the

maximum limit using the front panel keypad and terminating the
entry with the

 key.

5. Press

, and

enter the minimum limit using the front panel keypad and
terminating the entry with the

 key.

MARKER

 1:

DISPLAY

 Limit Menu  Mkr Limits

 Mkr Limit on OFF

 Edit Limit (Min/Max)  Max Limit

ENTER

Prior Menu  Edit Limit (Min/Max)  Min Limit

ENTER

MARKER

 1:

DISPLAY

 Limit Menu  Mkr Limits

 Mkr Limit on OFF

 Edit Limit (Min/Max)  Max Limit

ENTER

Prior Menu  Edit Limit (Min/Max)  Min Limit

ENTER

Summary of Contents for HP 8712ES




























































































































































































































































































































































































































































































































Reviews:

No comments