HP HP 8712ES, User Manual, Page: 369 / 507

ES User’s Guide 8-63
Hardkey/Softkey Reference
O
O
Softkey in the modify kit menu. Allows you to modify the following
characteristics of the open calibration standard in your calibration kit:
C
0
, C
1
, C
2
, C
3
, delay, loss, and Z
0
.
See “Calibration Kits” on page 6-23 for more information.
Access Keys:
Softkey in the menu. Displays several screens of
measurement channel settings, cal kit definitions, instrument settings,
and instrument configuration.
Softkey in the BOOTP setup menu. Allows you to set the host name or
host IP address of the only remote host you want to receive BOOTP
requests. If the optional boot host is not designated, the analyzer will
broadcast a BOOTP request at boot time and will accept a response
from any BOOTP server. If you don’t want to designate an optional
boot host, enter a null or empty string by selecting
.
See The LAN Interface User’s Guide Supplement for more information.
Access Keys:
Softkey in the BOOTP setup menu. Allows you to set the file path to
the only boot file you want to receive at boot time. If you don’t want to
designate an optional file path, enter a null or empty string by
selecting .
See The LAN Interface User’s Guide Supplement for more information.
Access Keys:
Open
CAL
More Cal Cal Kit
Modify (connector type)
Operating
Parameters
SYSTEM OPTIONS
Optional
Boot Host
Clear Entry
Enter
SYSTEM OPTIONS
LAN BOOTP Setup
Optional
File Path
Clear Entry Enter
SYSTEM OPTIONS LAN BOOTP Setup