manualshive.com logo in svg

HP c3700 - Workstation, Reference Manual, Page: 66 / 486

Share
Download
HP c3700 - Workstation Reference Manual Download Page 66

C

glColorPointer

Chapter 3

66

glColorPointer

glColorPointer

: define an array of colors.

C Specification

void glColorPointer(

GLint size,

GLenum type,

GLsizei stride,

const GLvoid *pointer)

Parameters

size

Specifies the number of components per color. Must be 3 or 4.

type

Specifies the data type of each color component in the array. Symbolic
constants GL_BYTE, GL_UNSIGNED_BYTE, GL_SHORT,
GL_UNSIGNED_SHORT, GL_INT, GL_UNSIGNED_INT, GL_FLOAT,
and GL_DOUBLE are accepted.

stride

Specifies the byte offset between consecutive colors. If stride is 0, (the
initial value), the colors are understood to be tightly packed in the
array.

pointer

Specifies a pointer to the first component of the first color element in
the array.

Description

glColorPointer specifies the location and data format of an array of color components to
use when rendering. size specifies the number of components per color, and must be 3 or
4. type specifies the data type of each color component, and stride specifies the byte stride
from one color to the next allowing vertexes and attributes to be packed into a single
array or stored in separate arrays. (Single-array storage may be more efficient on some
implementations; see glInterleavedArrays.)

When a color array is specified, size, type, stride, and pointer are saved as client-side
state.

To enable and disable the color array, call glEnableClientState and glDisableClientState
with the argument GL_COLOR_ARRAY. If enabled, the color array is used when
glDrawArrays, glDrawElements, or glArrayElement is called.

Notes

glColorPointer is available only if the GL version is 1.1 or greater.

The color array is initially disabled and isn’t accessed when glArrayElement,
glDrawArrays, or glDrawElements is called.

Summary of Contents for c3700 - Workstation







































































































































































































































































































































































































































































































Reviews:

No comments