manualshive.com logo in svg

HP c3700 - Workstation, Reference Manual, Page: 125 / 486

Share
Download
HP c3700 - Workstation Reference Manual Download Page 125

D

glDrawPixels

Chapter 4

125

The following table summarizes the meaning of the valid constants for the type
parameter:

The rasterization described so far assumes pixel zoom factors of 1. If glPixelZoom is used
to change the x and y pixel zoom factors, pixels are converted to fragments as follows. If
(x

r

, y

r

) is the current raster position, and a given pixel is in the nth column and mth row

of the pixel rectangle, then fragments are generated for pixels whose centers are in the
rectangle with corners at

 (x

r

 + zoom

x

n, y

r

 + zoom

y

 m)

(x

r

 + zoom

x

 (n + 1), y

r

+ zoom

y

 (m + 1))

where zoom

x

is the value of GL_ZOOM_X and zoom

y

 is the value of GL_ZOOM_Y.

Errors

•

GL_INVALID_VALUE is generated if either width or height is negative.

•

GL_INVALID_ENUM is generated if format or type is not one of the accepted values.

•

GL_INVALID_OPERATION is generated if format is GL_RED, GL_GREEN,
GL_BLUE, GL_ALPHA, GL_RGB, GL_RGBA, GL_LUMINANCE, or
GL_LUMINANCE_ALPHA, and the GL is in color index mode.

•

GL_INVALID_ENUM is generated if type is GL_BITMAP and format is not either
GL_COLOR_INDEX or GL_STENCIL_INDEX.

•

GL_INVALID_OPERATION is generated if format is GL_STENCIL_INDEX and
there is no stencil buffer.

•

GL_INVALID_OPERATION is generated if glDrawPixels is executed between the
execution of glBegin and the corresponding execution of glEnd.

Associated Gets

glGet with argument GL_CURRENT_RASTER_POSITION
glGet with argument GL_CURRENT_RASTER_POSITION_VALID

Table 4-1

Type

Corresponding Type

GL_UNSIGNED_BYTE

Unsigned 8-bit integer

GL_BYTE

Signed 8-bit integer

GL_BITMAP

Single bits in unsigned 8-bit integers

GL_UNSIGNED_SHORT

Unsigned 16-bit integers

GL_SHORT

Signed 16-bit integers

GL_UNSIGNED_INT

Unsigned 32-bit integers

GL_INT

32-bit integer

GL_FLOAT

Single-precision floating-point

Summary of Contents for c3700 - Workstation







































































































































































































































































































































































































































































































Reviews:

No comments