manualshive.com logo in svg

HP c3700 - Workstation, Reference Manual, Page: 458 / 486

Share
Download
HP c3700 - Workstation Reference Manual Download Page 458

T

glTexSubImage2D

Chapter 18

458

glTexSubImage2D

glTexSubImage2D

: specify a two-dimensional texture sub-image.

C Specification

void glTexSubImage2D(

GLenum target,

GLint level,

GLint xoffset,

GLint yoffset,

GLsizei width,

GLsizei height,

GLenum format,

GLenum type,

const GLvoid *pixels)

Parameters

target

Specifies the target texture. Must be GL_TEXTURE_2D.

level

Specifies the level-of-detail number. Level 0 is the base image level.
Level n is the nth mipmap reduction image.

xoffset

Specifies a texel offset in the x direction within the texture array.

yoffset

Specifies a texel offset in the y direction within the texture array.

width

Specifies the width of the texture sub-image.

height

Specifies the height of the texture sub-image.

format

Specifies the format of the pixel data. The following symbolic values
are accepted: GL_COLOR_INDEX, GL_RED, GL_GREEN, GL_BLUE,
GL_ALPHA, GL_RGB, GL_RGBA, GL_LUMINANCE, and
GL_LUMINANCE_ALPHA. If the extension GL_EXT_shadow is
supported, then the symbolic value GL_DEPTH_COMPONENT is also
accepted.

type

Specifies the data type of the pixel data. The following symbolic values
are accepted: GL_UNSIGNED_BYTE, GL_BYTE, GL_BITMAP,
GL_UNSIGNED_SHORT, GL_SHORT, GL_UNSIGNED_INT,
GL_INT, and GL_FLOAT.

pixels

Specifies a pointer to the image data in memory.

Description

Texturing maps a portion of a specified texture image onto each graphical primitive for
which texturing is enabled. To enable and disable two-dimensional texturing, call
glEnable and glDisable with argument GL_TEXTURE_2D.

glTexSubImage2D redefines a contiguous subregion of an existing two-dimensional
texture image. The texels referenced by pixels replace the portion of the existing texture
array with X indices xoffset and x width - 1, inclusive, and Y indices yoffset and

Summary of Contents for c3700 - Workstation







































































































































































































































































































































































































































































































Reviews:

No comments