manualshive.com logo in svg

HP c3700 - Workstation, Reference Manual, Page: 196 / 486

Share
Download
HP c3700 - Workstation Reference Manual Download Page 196

G

glGetLight

Chapter 7

196

glGetLight

glGetLightfv, glGetLightiv

: return light source parameter values.

C Specification

void glGetLightfv(

 GLenum light,

GLenum pname,

GLfloat *params)

void glGetLightiv(

GLenum light,

GLenum pname,

GLint *params)

Parameters

light

Specifies a light source. The number of possible lights depends on the
implementation, but at least eight lights are supported. They are
identified by symbolic names of the form GL_LIGHTi where 0

≥

i <

GL_MAX_LIGHTS.

pname

Specifies a light source parameter for light. Accepted symbolic names
are GL_AMBIENT, GL_DIFFUSE, GL_SPECULAR, GL_POSITION,
GL_SPOT_DIRECTION, GL_SPOT_EXPONENT,
GL_SPOT_CUTOFF, GL_CONSTANT_ATTENUATION,
GL_LINEAR_ATTENUATION, and
GL_QUADRATIC_ATTENUATION.

params

 Returns the requested data.

Description

glGetLight returns in params the value or values of a light source parameter. light
names the light and is a symbolic name of the form GL_LIGHTi for 0

≥

i <

GL_MAX_LIGHTS, where GL_MAX_LIGHTS is an implementation-dependent constant
that is greater than or equal to eight. pname specifies one of ten light source parameters,
again by symbolic name.

The following parameters are defined:

GL_AMBIENT

params returns four integer or floating-point values representing the ambient intensity
of the light source. Integer values, when requested, are linearly mapped from the
internal floating-point representation such that 1.0 maps to the most positive
representable integer value, and - 1.0 maps to the most negative representable integer
value. If the internal value is outside the range [- 1, 1], the corresponding integer return
value is undefined. The initial value is (0, 0, 0, 1).

GL_DIFFUSE

Summary of Contents for c3700 - Workstation







































































































































































































































































































































































































































































































Reviews:

No comments