manualshive.com logo in svg

HP c3700 - Workstation, Reference Manual, Page: 325 / 486

Share
Download
HP c3700 - Workstation Reference Manual Download Page 325

P

glPixelMap

Chapter 14

325

GL_PIXEL_MAP_I_TO_R

Maps color indices to red components.

GL_PIXEL_MAP_I_TO_G

Maps color indices to green components.

GL_PIXEL_MAP_I_TO_B

Maps color indices to blue components.

GL_PIXEL_MAP_I_TO_A

Maps color indices to alpha components.

 GL_PIXEL_MAP_R_TO_R

Maps red components to red components.

GL_PIXEL_MAP_G_TO_G

Maps green components to green components.

GL_PIXEL_MAP_B_TO_B

Maps blue components to blue components.

GL_PIXEL_MAP_A_TO_A

Maps alpha components to alpha components.

The entries in a map can be specified as single-precision floating-point numbers,
unsigned short integers, or unsigned long integers. Maps that store color component
values (all but GL_PIXEL_MAP_I_TO_I and GL_PIXEL_MAP_S_TO_S) retain their
values in floating-point format, with unspecified mantissa and exponent sizes.
Floating-point values specified by glPixelMapfv are converted directly to the internal
floating-point format of these maps, then clamped to the range [0, 1]. Unsigned integer
values specified by glPixelMapusv and glPixelMapuiv are converted linearly such that
the largest representable integer maps to 1.0, and 0 maps to 0.0.

Maps that store indices, GL_PIXEL_MAP_I_TO_I and GL_PIXEL_MAP_S_TO_S, retain
their values in fixed-point format, with an unspecified number of bits to the right of the
binary point.

Floating-point values specified by glPixelMapfv are converted directly to the internal
fixed-point format of these maps. Unsigned integer values specified by glPixelMapusv
and glPixelMapuiv specify integer values, with all 0s to the right of the binary point.

The following table shows the initial sizes and values for each of the maps. Maps that

are indexed by either color or stencil indices must have mapsize = 2

n

 for some n or the

results are undefined. The maximum allowable size for each map depends on the
implementation and can be determined by calling glGet with argument
GL_MAX_PIXEL_MAP_TABLE. The single maximum applies to all maps; it is at least
32.

Summary of Contents for c3700 - Workstation







































































































































































































































































































































































































































































































Reviews:

No comments