Hoval RoofVent CON-9, Design Handbook

Page: 69 / 280

67
D
E
F
G
H
I
J
K
L
M
N
Actuator Air-Injector:
adjusts the supply air discharge direction continuously from vertical to
horizontal
Heating coil:
LPHW coil consisting of copper tubes with aluminium fins
Access panel:
Access to the heating coil
Plate heat exchanger 2:
with bypass for energy recovery control
ER damper and bypass damper 2:
opposed dampers for energy recovery regulation, with continuous actuator
Extract air filter:
Bag filter with differential pressure switch for filter monitoring
Access panel:
Access to extract air filter
ER damper and bypass damper 1:
opposed dampers for energy recovery regulation, with continuous actuator
with spring return
Weather louvre door:
Access to the fresh air filter and to the DigiUnit terminal box
Fresh air filter:
Bag filter with differential pressure switch for filter monitoring
Plate heat exchanger 1:
with bypass for energy recovery control, differential pressure switch and
condensate drain
Fresh air damper and recirculation damper:
opposed dampers for switching between fresh air and recirculation opera-
tion, with continuous actuator with spring return
Gravity damper:
closes the bypass during shutdown and thus prevents heat loss
Exhaust air fan:
twin impeller centrifugal fan with maintenance-free drive and variable air flow
rate for defrosting operation
Exhaust air grille:
Access to exhaust air fan
Access panel:
Access to supply air fan
Supply air fan:
twin impeller centrifugal fan with maintenance-free drive
Extract air grille
Frost controller
Fig. D2: Components of the RoofVent
®
twin heat
RoofVent
®
twin heat
Construction and operation