Honeywell FMZ Series Pilot'S Manual Download Page 478

Page: 478 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

Messages

11-8

Honeywell International Inc. Do not copy without express permission of Honeywell.

Table 11--1 (cont)

FMS Messages

Message

Definition

Type

FPL STORAGE

FULL

ADVISORY The storage area for flight

plans is full.

FULL PERF

UNAVAIL

ALERTING A numerical fault has

occurred in the active

predictions and the FULL

PERF mode is not available.

GPS FAILED

GPS 1 FAILED

GPS 2 FAILED

GPS 3 FAILED

ALERTING Indicates inputs from the

identified GPS have failed.

GPS RAIM ABOVE

LIMIT

ALERTING The receiver autonomous

integrity monitoring (RAIM)

value is above the limit for

the current phase of flight.

GPS RAIM

UNAVAILABLE

ALERTING RAIM is not being generated

by the GPS receiver.

GRAPHIC NOT

AVAILABLE

ADVISORY There is no graphic function

input to the CD--820 or when

access is externally

selectable.

HIGH PCDR TURN

GRD SPD

ALERTING The ground speed exceeds

the limit for the defined

procedure turn.

HIGH HOLDING

GRD SPD

ALERTING The ground speed exceeds

the limits for the FAA

allowable size of holding

pattern.

INDEPENDENT

OPERATION

ALERTING The system reverted to

independent operation.

INTERSECTION

NOT FOUND

ADVISORY PD waypoint does not

intersect the active flight

plan.

INVALID AIRCRAFT

ALERTING The aircraft database has

been corrupted and has

been cleared and initialized.

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands