Honeywell FMZ Series Pilot'S Manual Download Page 283

Page: 283 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

6-125

Navigation

Honeywell International Inc. Do not copy without express permission of Honeywell.

DEFINING A PROCEDURE TURN

The PROCEDURE TURN page, shown in Figure 6--101, is displayed

by pushing the PCDR TURN prompt on the PATTERNS page. The

procedure turn fix is displayed at 1L, the boundary distance at 1R, and

the inbound course at 3L. No changes to this data are permitted. The

outbound leg length defined by distance (3R) or time (2R) and

procedure turn angle (2L) is permitted to be changed. The outbound leg

from HOSSY has a 3.5 NM default leg length while the default

procedure turn angle is L45

00735.03

Figure 6--101

Defining a Procedure Turn

The default turn angle is changed from the PROCEDURE TURN page.

Enter an angle between 20

and 90

, prefixed with either an

(left) or

(right), specifying the turn out direction. In addition, the outbound leg

is permitted to be changed by either specifying the outbound time

(OUTBD TIME) in minutes or outbound distance (OUTBD DIST) in NM.

The controlling entry is in large capital letters. The time or distance

value calculated by the FMS is based on predicted speeds at or into a

procedure turn entry fix (when available), the approach speed (when

available), or a default speed of 120 kts.

After changing any of the parameters, the ACTIVATE prompt at 6R is

displayed. Selecting this prompt redefines the procedure turn.

When the procedure turn is predicted to exceed the boundary distance,

the outbound leg and the turn angle are displayed in reverse video. The

procedure turn is still defined with these values.

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands