Honeywell FMZ Series Pilot'S Manual Download Page 141

Page: 141 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

5-21

Performance

Honeywell International Inc. Do not copy without express permission of Honeywell.

The following line select keys correspond to the associated definitions

on the PERF DATA page 3, shown in Figure 5--11.

-- The current or pilot--entered values for P ALT and OAT is

displayed at 1L. Data being displayed and the entry of information

is the same as for the PERF DATA pages 1 and 2.

-- The DENS ALT associated with the P ALT and OAT displayed

at 1L is displayed at 1R. Data being displayed and the entry of

information is the same as for the PERF DATA pages 1 and 2.

2L/2R

-- When the cargo HOOK load is > 0, the CATEGORY A

CEILING is displayed in reverse video.

-- The CATEGORY A CEILING HD (density altitude) for takeoff

or landing to a HELIPAD is displayed at 3L. The category A ceiling

density altitude is obtained from Agusta performance tables using

current OAT and gross weight.

When the CATEGORY A CEILING HELIPAD altitude is less than

the DENS ALT (1R), the CATEGORY A CEILING HELIPAD altitude

is displayed in reverse video.

-- The CATEGORY A CEILING HD for takeoff to a landing

SHORT FLD (area with limited obstacle clearance) is displayed at

3R. The category A ceiling density altitude is obtained from Agusta

performance tables using current OAT and gross weight.

When the CATEGORY A CEILING SHORT FLD altitude is less than

the DENS ALT (1R), the CATEGORY A CEILING SHORT FLD

altitude is displayed in reverse video.

-- The CATEGORY A CEILING HD for takeoff or landing to a

CLEAR AREA (for example, a runway) is displayed at 4L. The

category A ceiling density altitude is obtained from Agusta

performance tables using the current OAT and gross weight.

When CATEGORY A CEILING CLEAR AREA ceiling is less than

the DENS ALT (1R), the CATEGORY A CEILING CLEAR AREA

altitude is displayed in reverse video.

-- The CATEGORY A CEILING HD for when a takeoff is

performed requiring the helicopter to BACKUP when ascending is

displayed at 4R. The category A ceiling density altitude is obtained

from Agusta performance tables using current OAT and gross

weight.

When the CATEGORY A CEILING BACKUP altitude is less than the

DENS ALT (1R), the CATEGORY A CEILING BACKUP altitude is

displayed in reverse video.

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands