Honeywell FMZ Series Pilot'S Manual Download Page 53

Page: 53 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

System Components

3-12

Honeywell International Inc. Do not copy without express permission of Honeywell.

Degraded (DGR)

-- DGR is an alerting annunciator. This

annunciator is displayed or lit when the FMS cannot guarantee the

position accuracy for the present phase of flight due to sensor

availability. The approved sensors for the flight phases are listed in

Table 3--2.

Table 3--2

Approved Sensors for Flight Phase

Approved Sensors

(Navigation Mode)

Flight Phase

GPS

DME/DME

VOR/DME

Departure or

Terminal

En route

Oceanic

VOR/DME or VOR

Approach

GPS Approach

NDB Approach

The DGR annunciator is displayed on the horizontal situation

indicator (HSI) or primary flight display (PFD) page when both of the

following conditions are valid:

—

The sensors being used for navigation are not approved for the

current phase of flight.

—

The FMS is the selected aircraft navigation source on EDS.

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands