Honeywell FMZ Series Pilot'S Manual Download

Page: 263 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

6-105

Navigation

Honeywell International Inc. Do not copy without express permission of Honeywell.

PATTERNS

Patterns are selected for both the active and stored flight plans. For

active flight plans only, the PATTERN prompt at 6L is displayed when

selecting the

DIR

key. For stored flight plans, the prompt at 6L is always

PATTERN. The procedures for selecting and defining all patterns are

similar. In addition to the pilot--defined patterns, some procedures, such

as approach procedures, contain patterns. These database patterns

are added to the flight plan when activating the approach procedure.

Pattern Definition

Figure 6--83 shows each pattern type except the search patterns.

Procedures for using each pattern type are contained in this guide. The

following patterns are available in the FMS:

HOLD (page 6-108)

PROCEDURE TURN (page 6-121)

FLYOVER (page 6-127)

ORBIT (page 6-128)

RADIAL (page 6-131)

SUSPEND (page 6-134)

SEARCH (page 6-142).

The ORBIT and RADIAL pattern prompts are displayed when SPECIAL

MISSION is turned ON. See setting special mission under Flight

Configuration for details.

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands