Honeywell FMZ Series Pilot'S Manual Download Page 421

Page: 421 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

7-55

Flight Plan

Honeywell International Inc. Do not copy without express permission of Honeywell.

01685.02

Figure 7--32

Latched Speed Protection

The conditions resulting in latched speed protection are as follows:

1. A latched speed occurs at the last bottom--of--descent (BOD) when

the current speed command is more than 5 kts above the current

airspeed. This is also true when the BOD altitude constraint is

deleted.

2. A latched speed occurs when the altitude preselector is dialed while

in ALT to a BOD and the current target is greater than 5 kts more

than the current speed.

3. When VNAV has transitioned out of VPATH and the current airspeed

is not within 5 kts of the speed command.

4. When VNAV is in VPATH and the CAS becomes greater than V

+ 10 kts, VNAV changes to VFLCH and latches to V

The LATCHED SPEED mode is removed by entering *DELETE* from

the scratchpad to line select key 1R on page 1 of the ACTIVE FLT

PLAN.

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands