Honeywell FMZ Series Pilot'S Manual Download Page 127

Page: 127 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

5-7

Performance

Honeywell International Inc. Do not copy without express permission of Honeywell.

SPD/FF AND CURRENT GROUND SPEED/FF

METHOD

The performance initialization has three pages. Many items are recalled

from the previous flight to reduce the number of required inputs. These

items are permitted to be changed. The only items not retained from the

previous flight or over a power cycle and are required entries are:

Cruise fuel flow (in PILOT SPD/FF mode only)

Initial cruise altitude

Fuel quantity (unless gauge value is available)

Baggage weight

Pilot and passenger weight.

An average cruise wind is entered, when available.

Pilot Speed/Fuel Flow (SPD/FF) Method

The PILOT SPD/FF method of performance initialization has a total of

three pages.

PERFORMANCE INIT 1/3

-- The following information is displayed

on the PERFORMANCE INIT 1/3 page, shown in Figure 5--4:

— 1L

-- Aircraft type (ACFT TYPE) is displayed at 1L. Pilot--entry

is not permitted. The aircraft type is loaded from the aircraft

database (ACDB).

When no aircraft database is loaded, 1L is blank.

The ACDB is loaded when the FMS is installed. The aircraft

database is retained from flight to flight.

The pilot verifies the ACFT TYPE data field has the correct

aircraft type. The system generates incorrect performance

predictions when the FMS contains the wrong ACDB.

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands