Honeywell FMZ Series Pilot'S Manual Download

Page: 314 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

Navigation

6-156

Honeywell International Inc. Do not copy without express permission of Honeywell.

-- The PTRN LENGTH (overall length of the search pattern) in

NM along the initial heading direction is defined at 4R. The pattern

length specifies the minimum distance away from the starting

position achieved by the search pattern waypoints.

The pattern length is modifiable on the LADDER SEARCH page.

-- Deletes search patterns, activates newly defined search

patterns, or activates changes to the selected search pattern

definition parameters. During the initial definition of a new search

pattern, 6R is blank and not operational until all aspects of the

search pattern is defined. When all aspects of the search pattern is

defined with valid values, ACTIVATE is displayed and 6R becomes

operational.

When the SAR pattern is activated, the 6R prompt changes to

DELETE. Selecting the DELETE prompt removes the search

pattern from the active flight plan.

The ACTIVATE prompt is displayed at 6R when one of the search

pattern definition parameters are changed. Selecting the ACTIVATE

prompt activates the search pattern.

Summary of Contents for FMZ Series































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands

Honeywell FMZ Series, Pilot'S Manual

Search results

Summary of Contents for FMZ Series

Reviews:

Related manuals for FMZ Series

Brands by name

Popular brands